Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

TROY INDUSTRIES
TROY INDUSTRIES, INC. AR-15/M16 END PLATE SLING MOUNTS

812699010259 100004383

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

Replaces factory receiver end plate and provides three secure, ambidextrous attachment points for the push-button QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won’t fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swivel accepts slings up to 1¼" wide and allows a full 360° of rotation.

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Mehr...

Für sichere, beidseitige Befestigung von Schlingen mit Druckknopf-QD-Schwenkverschlüssen

Ersetzt die werkseitige Empfänger-Endplatte und bietet drei sichere, beidseitige Befestigungspunkte für den Druckknopf-QD-Schwenkverschluss. Hergestellt aus gehärtetem Aluminium mit zusätzlichem Metall an den Belastungspunkten, um sicherzustellen, dass diese Halterung bei intensiver Nutzung nicht versagt. Abgerundete Kanten verhindern das Hängenbleiben an Schlingen oder anderem Zubehör. Harteloxiert für zusätzliche Stärke und Verschleißfestigkeit, mit einer mattschwarzen Oberfläche, die zu den meisten werkseitigen Buffer-Rohren passt. Der robuste Edelstahl-Schwenkverschluss akzeptiert Schlingen bis zu 1¼" breit und ermöglicht eine vollständige 360°-Drehung.

TECHNISCHE DATEN: Halterung - Aluminium, harteloxiert, matt schwarz. Schwenkverschluss - Edelstahl, matte schwarze Oberfläche. Akzeptiert Schlingen bis zu 1¼” (3,2 cm) breit. M4 passt zu M4-Stil Karabiner mit verstellbarem Schaft.

Mehr...

Kundenbewertungen zu TROY INDUSTRIES, INC. M4 OEM Sling Mount, Black

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,7

Quality QD Mount but... (26.11.2011)

I love the QD 1-1/4" sling swivel type attachment and Troy makes quality products. The problem with this one comes when you try and tighten the castle nut on your buffer tube back down after the Troy plate in on there. Depending on the position, not all castle nut wrenches will work on this job. It is also very easy to scratch the threads of your buffer tube or other areas. You cannot use the three contact point type wrench to tighten it down because the QD points are in the way.
So as long as you can get it tightened (I suggest the single contact castle nut wrench) it is a quality made product that looks very nice when installed properly and works as a great attachment point for a 3 point sling setup.

Very difficult to tighten (01.01.2012)

The sling mount itself is great EXCEPT for one major flaw imo - you can't tighten it well with a normal 3-point castle nut wrench because the QD points bulge out. Even with an old style single point wrench it's awkward to do depending on where your notches are when it's time to fully tighten. You may end up having to try and tighten at an angle... and pray it doesn't loosen up with use. Come on Troy, provide better info on this before people buy it, or provide a tool with the sling to simplify this process.

Great product, no install issues (28.08.2012)

This endplate looks great and was easy to install. I had zero issues using the Rock River M4 Stock Wrench (brownells# AR0165)to tighten down the castle nut with this endplate. Can't wait to put a sling on this bad boy...

Quality part (15.09.2012)

Quality product from a quality manufacturer. I really like the option of mounting sling on either side. This product is also compatible with Magpul STR stock allowing quick detach swivel from end plate to mount directly onto stock attachment point

Not 360Â° of rotation (18.11.2013)

No problems installing with standard 3 point armoror's wrench or single point spanner wrench. However, the swivel does not provide for 360Â° of rotation as described. There are limit "stops" milled in just like Troy's rail attachment part 100-005-083WB.

I would have preferred the 360Â° rotation as described in order to allow free movement of a 3-point sling.

Look before buying (28.12.2013)

Hello all,
I don't know if I got a out of spec buffer tube but the castle nut would not let the mount go far enough back without the mount rubbing on the receiver. I had to file flats on the round parts to allow the mount to clear. Also it will not work with an oversized forward assist. Since I filed it I won't be sending it back but will eat the price and order another style. Where the quick detach are need to be set back a little bit

Buyer beware - may not work for your gun (17.01.2015)

I own a lot of Troy products, but this one has left me shaking my head and $40 poorer. I read the previous reviews about issues using a 3-point wrench on the castle nut, but I've dealt with that before on other products and gotten past it with a little ingenuity. Be aware though, you may not even get that far. In building up an SBR, I purchased the LWRC UCIW stock to reduce additional length. The round QD receiver knobs on this end plate will not allow the buffer tube of the UCIW to screw in to the receiver far enough to capture the buffer detent. I even tried to grind the knobs to get enough clearance to be able to rotate the buffer tube to get enough threaded in to the receiver. You'd have to remove so much metal that there would be no structural integrity. I use my rifles for work and I don't need the rifle coming off the sling during an op. Clearly, others have been able to get this on some rifles as I've seen photos, but if you do buy it, test fit it first and don't try to "smith" it in to place. Just return it and get another SPS mount for half the price.

Another great product from Troy! (06.01.2017)

After reading some of the other reviews, I was a little hesitant about ordering this. I'm not a fan of "minor modification required". After disassembly I test fit every thing just to be sure and there was adequate clearance where needed and no excess where not. I installed this on my FN15 in about 15 minutes total and love it. Works great with the Troy single point sling. NOTE: There must be an updated version as the one I received has a third connection point at the bottom rear of part (where the print is in the photo).

Does not fit Ruger SR-762 (17.02.2017)

Great product, well made. Does not fit Ruger SR-762. Had to use a different adaptor.

They work fine! (24.09.2018)

No Sir, my experience with this Troy sling mount is very good. I have used it on mil spec tubes, commercial tubes, and pistol only tubes. This mount worked on all of them. I used the Rock River 3 point wrench to tighten the nut. Those that have complained that it didn't work must of had a tube with shorter then normal threads. It works great. Mine has the attachment points on both sides and one in the middle. I couldn't ask for better

Lesen Sie 10 weitere Bewertungen bei brownells.com

84.9 84.9 1 EUR

Artikel-Nr.: 100004383
TROY INDUSTRIES, INC. M4 OEM Sling Mount, Black
Herstellerproduktnummer: SMOU-M4S-00BT-0 812699010259 Ersetzt die werkseitige Empfänger-Endplatte und bietet drei sichere, beidseitige Befestigungspunkte für den Druckknopf-QD-Schwenkverschluss. Hergestellt aus gehärtetem Aluminium mit zusätzlichem Metall an den Belastungspunkten, um sicherzustellen, dass diese Halterung bei intensiver Nutzung nicht versagt. Abgerundete Kanten verhindern das Hängenbleiben an Schlingen oder anderem Zubehör. Harteloxiert für zusätzliche Stärke und Verschleißfestigkeit, mit einer mattschwarzen Oberfläche, die zu den meisten werkseitigen Buffer-Rohren passt. Der robuste Edelstahl-Schwenkverschluss akzeptiert Schlingen bis zu 1¼" breit und ermöglicht eine vollständige 360°-Drehung.

84.9 EUR 2 84,90 € *

Lieferzeit ca. 14-21 Tage.
2 Stk. im Großlager

Eigenschaften: Art: Rifle Sling Adapter Farbe: Black Material: Steel

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Ersetzt die werkseitige Empfänger-Endplatte und bietet drei sichere Befestigungspunkte für QD-Sling-Wirbel.
Hergestellt aus gehärtetem Aluminium mit zusätzlichem Metall an den Belastungspunkten für hohe Strapazierfähigkeit.
Robuster Edelstahlwirbel ermöglicht eine vollständige 360°-Rotation und nimmt Riemen bis zu 1¼" Breite auf.

Eigenschaften

Art: Rifle Sling Adapter Farbe: Black Material: Steel Versandgewicht: 0,045kg Versandhöhe: 13mm Versandbreite: 84mm Versandlänge: 97mm UPC : 812699010259

Artikeldetails

Made in USA

Entdecke die TROY AR-15/M16 End Plate Sling Mount 🛠️ für sichere Befestigungen und robuste Qualität. Perfekt für dein M4!

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Mehr...

Für sichere, beidseitige Befestigung von Schlingen mit Druckknopf-QD-Schwenkverschlüssen

Mehr...