Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

BROWNELLS
308 AR LOWER RECEIVER VISE BLOCK

050806108738 080000494

Protects Receiver From Damage When Clamping In Vise

Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer; will not mar or scratch weapon’s finish.

SPECS: Machined Delrin, white. 5-1⁄8” (13cm) high, 3” (7.6cm) wide, 1” (2.5cm) thick. Fits most AR-Style .308 rifles except Rock River Arms.

Mehr...

Schützt den Receiver vor Beschädigungen beim Klemmen im Vise

Der robuste Vise-Block übernimmt die gesamte Klemmkraft, sodass dein teurer unterer Receiver nicht zerkratzt, verzogen oder anderweitig beschädigt wird. Setze den Block in das Magazinfach ein, genau wie ein gewöhnliches Magazin, und klemme das andere Ende in deinen Werkbank-Vise. Der Magazinverschluss verriegelt sich am Block und hält das Gewehr sicher und stabil für Montage, Demontage, Reinigung oder Reparatur. Das doppelseitige Design passt auf ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308 und Remington R-25. Passt nicht auf Rock River Arms untere Receiver. Gefräst aus robustem, haltbarem, chemikalienbeständigem Delrin®-Polymer; hinterlässt keine Spuren oder Kratzer auf der Oberfläche der Waffe.

TECHNISCHE DATEN: Aus gefrästem Delrin, weiß. 5-1⁄8” (13cm) hoch, 3” (7.6cm) breit, 1” (2.5cm) dick. Passt auf die meisten AR-Stil .308 Gewehre, außer Rock River Arms.

Mehr...

Kundenbewertungen zu BROWNELLS AR-Style .308 Lower Receiver Block

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,2

Great product, awful price (05.02.2011)

The block itself is solid and exactly what you would expect in a lower receiver vise block. It fits perfectly with my DPMS lower. The block itself earns 5 stars, when you don't consider the cost.

Not a good fit (15.10.2012)

Nice quality but found out that it DOES NOT fit a SIG716 magwell...its to big or the Sig is to small.May work on other AR-10 style rifles.

Will not fit a S&W M&P10 .308 (30.10.2013)

This is a very nice product but will not fit the highly proprietary S&W M&P10. I thought it would work since the DPMS mags fit the M&P10 without issue. The block is just slightly too large on the DPMS side and will not enter the well more than one inch before jamming. I intend to keep it as it is the closest match that I have found to date, and it appears that a little sandpaper work will achieve a fit.

Works Great (07.12.2013)

I just got this block and it works great in both my AR-10 mag well and my R-25/LR308 mag well. Does exactly what it's supposed to.

Poor quality (06.12.2015)

The shoulder on the one I received, when resting flat in the jaws of the vice, does not put the rifle in a horizontal position. Instead the muzzle is pointed upwards and the entire block has to be re-positioned in the vise in order for the rifle to be parallel with the work surface. My AR15 block does not work this way. Additionally, the R-25 end of the block is too large to easily fit into the magazine well of my POF P-308. I'm going to try removing additional stock and knock down the sharp corners with a dremel tool so it might fit more easily. Way too expensive piece of plastic that was not machined correctly.

Does not fit out of the package. (15.12.2015)

This is being used on a DPMS G2 Recon 308.

Let's start by saying that magazine wells don't have square corners, but this block does...

All four corners needed to be chamfered AND additional machining was required to get it to fit properly. I understand the need for a tight fit, but the block was about 10 mil to large fore/aft to insert into the mag well. The tooling marks indicate that this piece was hogged out fast to minimize machine time. A slower travel rate and lighter cuts would reduce the deflection of the plastic/tooling and improve dimensional tolerancing.

For the price, this is a poorly machined piece that suffers from poor quality control and improper geometry. Either drop the price or improve the quality.

Yes, you have to fit it. (11.12.2016)

This is a gunsmith tool, and as such it didn't surprise me that it required a little bit of fitting. I wouldn't have it any other way, because I got a nice tight fit on my DPMS Recon.

Guys who are sanding and dremel-ing on nylon are doing way too much work.

It only took a couple of passes with a sharp knife to break the corner on only two of the edges of this block. Now my rifle sits over the vise and does not move. Excellent.

Works as advertised (26.01.2017)

Fits my M&P 10 perfectly. Nice solid hold while cleaning or working on my rifle.

<img width="500" src='/userdocs/reviewimages/cc6cee40-db5d-49ca-9b14-c0ee002179ca.jpg' alt=''>

An unsatisfactory tool (14.09.2018)

For the price of this tool, you would think that they would've finished it. Out of the package it is not useable. The angles that are milled into it are off by at least 10 degrees, it won't lock into the receiver like a magazine does. The edges have to be cut off before it will even enter the mag well. This is no more than a kit, to be finished by the end user and as such it is worth no more than the base material, $10.00 at the most! Don't waste your money on this.

Obviously mismanufactured (16.09.2018)

On further review, it's obvious to me that their fixture slipped at some point and no one noticed that the whole thing is off by 10 degrees which pretty much negates its usefulness as a tool. I've seen better Jr High School shop projects. I wish I would've seen the Sincair tool for half the price before I bought this.

Lesen Sie 10 weitere Bewertungen bei brownells.com

54.9 54.9 1 EUR

Artikel-Nr.: 080000494
BROWNELLS AR-Style .308 Lower Receiver Block 050806108738 Der robuste Vise-Block übernimmt die gesamte Klemmkraft, sodass dein teurer unterer Receiver nicht zerkratzt, verzogen oder anderweitig beschädigt wird. Setze den Block in das Magazinfach ein, genau wie ein gewöhnliches Magazin, und klemme das andere Ende in deinen Werkbank-Vise. Der Magazinverschluss verriegelt sich am Block und hält das Gewehr sicher und stabil für Montage, Demontage, Reinigung oder Reparatur. Das doppelseitige Design passt auf ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308 und Remington R-25. Passt nicht auf Rock River Arms untere Receiver. Gefräst aus robustem, haltbarem, chemikalienbeständigem Delrin®-Polymer; hinterlässt keine Spuren oder Kratzer auf der Oberfläche der Waffe.

54.9 EUR 0 54,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.

Eigenschaften: Hersteller: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der BROWNELLS .308 Lower Receiver Vise Block schützt deinen Lower Receiver vor Kratzern und Beschädigungen.
Einfach in das Magazinwell einsetzen und im Schraubstock klemmen für sichere Montage und Demontage.
Passt für die meisten AR-Style .308 Gewehre, außer Rock River Arms, und ist aus langlebigem Delrin® Polymer gefertigt.

Eigenschaften

Hersteller/Modell: AR-15 Versandgewicht: 0,249kg Versandhöhe: 36mm Versandbreite: 114mm Versandlänge: 145mm UPC : 050806108738

Artikeldetails

Made in USA

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de

Schütze deinen .308 Lower Receiver mit dem BROWNELLS Vise Block! 🛠️ Robuste Konstruktion für Montage und Reparatur, sicher und stabil.

Protects Receiver From Damage When Clamping In Vise

SPECS: Machined Delrin, white. 5-1⁄8” (13cm) high, 3” (7.6cm) wide, 1” (2.5cm) thick. Fits most AR-Style .308 rifles except Rock River Arms.

Mehr...

Schützt den Receiver vor Beschädigungen beim Klemmen im Vise

TECHNISCHE DATEN: Aus gefrästem Delrin, weiß. 5-1⁄8” (13cm) hoch, 3” (7.6cm) breit, 1” (2.5cm) dick. Passt auf die meisten AR-Stil .308 Gewehre, außer Rock River Arms.

Mehr...

Kundenbewertungen zu BROWNELLS AR-Style .308 Lower Receiver Block

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,2

Great product, awful price (05.02.2011)

The block itself is solid and exactly what you would expect in a lower receiver vise block. It fits perfectly with my DPMS lower. The block itself earns 5 stars, when you don't consider the cost.

Not a good fit (15.10.2012)

Nice quality but found out that it DOES NOT fit a SIG716 magwell...its to big or the Sig is to small.May work on other AR-10 style rifles.

Will not fit a S&W M&P10 .308 (30.10.2013)

Works Great (07.12.2013)

I just got this block and it works great in both my AR-10 mag well and my R-25/LR308 mag well. Does exactly what it's supposed to.

Poor quality (06.12.2015)

Does not fit out of the package. (15.12.2015)

Yes, you have to fit it. (11.12.2016)

Works as advertised (26.01.2017)

Fits my M&P 10 perfectly. Nice solid hold while cleaning or working on my rifle.

<img width="500" src='/userdocs/reviewimages/cc6cee40-db5d-49ca-9b14-c0ee002179ca.jpg' alt=''>

An unsatisfactory tool (14.09.2018)