There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Mehr...
Konvertiere dein Lower einfach auf 9mm
Es ist nicht notwendig, bei deinem nächsten Aufbau eines Karabiners im Pistolenkaliber ein spezielles AR-Lower zu verwenden. Mit dem Stern Defense AR-15 9mm Conversion Adapter kannst du beliebte Pistol Magazine nutzen, von denen du vielleicht bereits einen Vorrat hast. Stern Defense bietet zwei verschiedene Modelle ihres Conversion Adapters an: eines, das Glock® Magazine verwendet, und eines, das entweder Smith & Wesson M&P oder Sig 320/250 Magazine verwendet. Der Stern Defense AR-15 9mm Conversion Adapter lässt sich in Sekundenschnelle in jeden mil-spec AR-15 Lower Receiver installieren und verfügt sogar über eine Funktion zum Offenhalten des Verschlusses nach dem letzten Schuss. Jeder Adapter wird aus Aluminium gefräst und benötigt einen 9mm/.40 S&W Lauf sowie einen Glock-cut Verschluss. Hergestellt aus Aluminium in Luftfahrtqualität, leicht, ergonomisches Design, Installation in Sekunden. Wenn du darüber nachdenkst, dein AR-15 auf 9mm umzurüsten, zieh den Stern Defense Adapter in Betracht!
Mehr...
Kundenbewertungen zu STERN DEFENSE, LLC AR-15 9mm Coversion Adapter for Beretta 92 Magazines
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.
Artikel-Nr.: 100039214 STERN DEFENSE, LLC AR-15 9mm Coversion Adapter for Beretta 92 Magazines Herstellerproduktnummer: 001SDMAGADB929M860141001591 Es ist nicht notwendig, bei deinem nächsten Aufbau eines Karabiners im Pistolenkaliber ein spezielles AR-Lower zu verwenden. Mit dem Stern Defense AR-15 9mm Conversion Adapter kannst du beliebte Pistol Magazine nutzen, von denen du vielleicht bereits einen Vorrat hast. Stern Defense bietet zwei verschiedene Modelle ihres Conversion Adapters an: eines, das Glock® Magazine verwendet, und eines, das entweder Smith & Wesson M&P oder Sig 320/250 Magazine verwendet. Der Stern Defense AR-15 9mm Conversion Adapter lässt sich in Sekundenschnelle in jeden mil-spec AR-15 Lower Receiver installieren und verfügt sogar über eine Funktion zum Offenhalten des Verschlusses nach dem letzten Schuss. Jeder Adapter wird aus Aluminium gefräst und benötigt einen 9mm/.40 S&W Lauf sowie einen Glock-cut Verschluss. Hergestellt aus Aluminium in Luftfahrtqualität, leicht, ergonomisches Design, Installation in Sekunden. Wenn du darüber nachdenkst, dein AR-15 auf 9mm umzurüsten, zieh den Stern Defense Adapter in Betracht!
309.9EUR15309,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 100027483 STERN DEFENSE, LLC AR-15 9mm Conversion Adapter for Glock® Magazines Herstellerproduktnummer: 001-SD MAG-AD9-860141001508 Es ist nicht notwendig, bei deinem nächsten Aufbau eines Karabiners im Pistolenkaliber ein spezielles AR-Lower zu verwenden. Mit dem Stern Defense AR-15 9mm Conversion Adapter kannst du beliebte Pistol Magazine nutzen, von denen du vielleicht bereits einen Vorrat hast. Stern Defense bietet zwei verschiedene Modelle ihres Conversion Adapters an: eines, das Glock® Magazine verwendet, und eines, das entweder Smith & Wesson M&P oder Sig 320/250 Magazine verwendet. Der Stern Defense AR-15 9mm Conversion Adapter lässt sich in Sekundenschnelle in jeden mil-spec AR-15 Lower Receiver installieren und verfügt sogar über eine Funktion zum Offenhalten des Verschlusses nach dem letzten Schuss. Jeder Adapter wird aus Aluminium gefräst und benötigt einen 9mm/.40 S&W Lauf sowie einen Glock-cut Verschluss. Hergestellt aus Aluminium in Luftfahrtqualität, leicht, ergonomisches Design, Installation in Sekunden. Wenn du darüber nachdenkst, dein AR-15 auf 9mm umzurüsten, zieh den Stern Defense Adapter in Betracht!
299.9EUR0299,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Artikel-Nr.: 100033498 STERN DEFENSE, LLC AR-15 9mm Conversion Adapter for S&W M&P/Sig 320 Magazines Herstellerproduktnummer: 001SDMAGADMP9AN850001176217 Es ist nicht notwendig, bei deinem nächsten Aufbau eines Karabiners im Pistolenkaliber ein spezielles AR-Lower zu verwenden. Mit dem Stern Defense AR-15 9mm Conversion Adapter kannst du beliebte Pistol Magazine nutzen, von denen du vielleicht bereits einen Vorrat hast. Stern Defense bietet zwei verschiedene Modelle ihres Conversion Adapters an: eines, das Glock® Magazine verwendet, und eines, das entweder Smith & Wesson M&P oder Sig 320/250 Magazine verwendet. Der Stern Defense AR-15 9mm Conversion Adapter lässt sich in Sekundenschnelle in jeden mil-spec AR-15 Lower Receiver installieren und verfügt sogar über eine Funktion zum Offenhalten des Verschlusses nach dem letzten Schuss. Jeder Adapter wird aus Aluminium gefräst und benötigt einen 9mm/.40 S&W Lauf sowie einen Glock-cut Verschluss. Hergestellt aus Aluminium in Luftfahrtqualität, leicht, ergonomisches Design, Installation in Sekunden. Wenn du darüber nachdenkst, dein AR-15 auf 9mm umzurüsten, zieh den Stern Defense Adapter in Betracht!
309.9EUR0309,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Mehr...
Konvertiere dein Lower einfach auf 9mm
Es ist nicht notwendig, bei deinem nächsten Aufbau eines Karabiners im Pistolenkaliber ein spezielles AR-Lower zu verwenden. Mit dem Stern Defense AR-15 9mm Conversion Adapter kannst du beliebte Pistol Magazine nutzen, von denen du vielleicht bereits einen Vorrat hast. Stern Defense bietet zwei verschiedene Modelle ihres Conversion Adapters an: eines, das Glock® Magazine verwendet, und eines, das entweder Smith & Wesson M&P oder Sig 320/250 Magazine verwendet. Der Stern Defense AR-15 9mm Conversion Adapter lässt sich in Sekundenschnelle in jeden mil-spec AR-15 Lower Receiver installieren und verfügt sogar über eine Funktion zum Offenhalten des Verschlusses nach dem letzten Schuss. Jeder Adapter wird aus Aluminium gefräst und benötigt einen 9mm/.40 S&W Lauf sowie einen Glock-cut Verschluss. Hergestellt aus Aluminium in Luftfahrtqualität, leicht, ergonomisches Design, Installation in Sekunden. Wenn du darüber nachdenkst, dein AR-15 auf 9mm umzurüsten, zieh den Stern Defense Adapter in Betracht!
Mehr...
Kundenbewertungen zu STERN DEFENSE, LLC AR-15 9mm Coversion Adapter for Beretta 92 Magazines
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,7
Great product so far.(25.06.2018)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(26.06.2018)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(30.06.2018)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(21.08.2018)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(06.10.2018)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.