Ihr Warenkorb ist leer.

Warenkorb

WOLFF
AR-15/M16 EXTRA-POWER HAMMER SPRING

969000100

Helps Eliminate Common Ignition Problems Great When Using Ammo With Hard Primers

Durable, steel springs provide extra hammer power to ensure proper ignition with each trigger pull. Replaces factory spring. Note: For use in semi-auto models only. Not for use in full auto or burst fire models.

SPECS: Steel. Approximately 23/32" (18.2mm) wide, 2" (5.1cm) long.

Mehr...

Hilft häufige Zündprobleme zu beseitigen - Ideal bei Munition mit harten Zündern

Langlebige, aus Stahl gefertigte Federn sorgen für zusätzliche Schlagkraft des Hammers und gewährleisten damit eine zuverlässige Zündung bei jedem Abzug. Ersetzt die Werksfeder. Hinweis: Nur für die Verwendung in Halbautomatik-Modellen. Nicht geeignet für vollautomatische oder Feuerstoß-Modelle.

SPECS: Stahl. Ungefähr 23/32" (18.2mm) breit, 2" (5.1cm) lang.

Mehr...

Kundenbewertungen zu WOLFF Hammer Spring

Anzahl der Bewertungen: 16
Von brownells.com: 16
Durchschnittliche Bewertung: 4,7

No more Failure to Fire (13.01.2013)

Eliminate Failure to Fire in 7.62x39 upper with TULAmmo, and Chiappa .22 upper with remington ammo. Had Bushmaster lower parts kits. Heavier hammer was not required

Never misfire again (18.04.2016)

I first tried this spring in a AR 10 I built a few months back and the original would not fire a single factory load. I installed the spring and never misfired again. I had a 5.56 that I built and it occasionally would misfire. So I broke it down in the field and installed the heavy spring and had the same great results. The gun functioned perfict every time.

Made Improvement (04.07.2017)

Helped out my 7.62x39 upper. Just realize a side effect is that the bolt will be harder to pull back. Enough of difference that my wife and kid complain about it.

AF15 with milsurp 5.45 (11.08.2010)

I shoot milsurp 5.45 Russian ammo in my AR-15, and the hard primers caused between 3 to 5 unfired rounds per mag using the stock hammer spring.
This Wolff spring gave me 3 unfired rounds in my last 40 to 50 mags with no other changes.

Does work for AR15 Timney triggers (20.10.2010)

Tried this on my timney trigger after getting light strikes on primers and the spring is too large.

Significant reduction in misfires (02.04.2011)

I was experiencing a 30% misfire rate (6 out of 20) with steel-case ammo in my 7.62x39 custom AR15. Installing this spring helped significantly to reduce misfires.

Heavy Weight Hammer Spring (19.06.2011)

Harder to install because of the heavy spring but works like a champ and something needed for my AR 7.62x39.

Buying another for next build (22.06.2011)

Was having about one out of three "no fires" on my 7.62x39 with steel ammo. This completely cured the problem. Still had a feed problem with all brands of mags, so I alternated brass and steel rounds in my mags, and now all problems gone. Works like it should, no jams or no fires.

Greatly Reduces Lock Time (03.10.2011)

These heavy weight hammer springs greatly reduce lock time in competition rifles. Replace your after market (RRA etc.) hammer spring with one of these. Your scores will go up, especially in off hand!

Great for your .50BMG lower (19.03.2012)

This was exactly what was needed for my lower that I used for a BOHICA .50BMG upper.

Completely fixed my problem! (04.10.2012)

I was having a problem with light strikes when I bought a new upper in 7.62X39. I was using a DPMS lower and some wolf ammo. I know this ammunition has hard primers but my Colt had never had an issue. I replaced the factory spring with this Wolffe heavy weight hammer spring and problem solved!

Reduces lock time. (19.11.2012)

It's physics. If the hammer spring is heavier, the hammer will move more quickly. If you do ANY amount of shooting off-hand/standing/kneeling/sitting (or even prone) past 50 yards, your accuracy will benefit from this hammer spring.

It ever-so-slightly increased the trigger pull on my ALG ACT trigger, but I tried a Tubbs CS trigger spring and a JP reduced-power trigger spring and both combinations brought the trigger pull back down to noticeably lighter than how the trigger came from the factory. The ACT is BUTTER SMOOTH and top-notch. If your trigger is even slightly gritty (most are), you won't even notice a difference in the trigger pull.

I don't have any exact numbers for group sizes, but my group sizes, standing at 50 yards, during my agency's carbine qual shrank considerably when using this hammer spring. The audible 'whack' of the hammer hitting the firing pin/rear of the bolt carrier is noticeably louder using this spring. If your current hammer spring is very worn/weak, you'll even notice the increased strength when you pull on the charging handle.

This also offers insurance against light primer strikes whent he weapon is dirty/fouled. There is no downside. A solid value.

And, it's made from Wolff's proprietary 'rocket wire' steel alloy. They use a special heat-treat process for the metal, after winding the spring. They then coat the surface with a protectant; I've never seen a Wolff spring rust (even when shooting thousands of rounds of corrosive ammo in an AK47/74). It costs more than the el-cheapo parts beacuse YOU'RE GETTING MORE. :)

Fixed CMMG .22LR Conversion Problem (15.05.2013)

I had about 80% of rounds fail to fire using my CMMG .22LR conversion bolt. This spring brought that rate down to around 3%.

Will fix the problem (20.03.2016)

This spring will fix any light strike problem you are having with 7.62x39 AR upper. Tested on many different types of ammo, and none failed to fire after installing. I would also recommend you change out the firing pin to an enhanced firing pin, this combo works.

GOOD PRODUCT, GREAT RESULTS. (03.05.2017)

i HAD PUT TOGETHER AN AR-10 BUT ON A TEST FIRE (USING GERMAN MILITARY SURPLUS AMMO) THE PRIMERS WERE ONLY DIMPLED A BIT. i ORDERED WOLFE HAMMER SPRINGS AND PROBLEM WAS SOLVED. I BOUGHT A COUPLE EXTRA AS BACK UPS OT FOR OTHER FUTURE BUILDS.

SHIPPING WAS ALSO VERY QUICK.

Immediately solved my light strike no pr (23.09.2017)

I built a budget ar and it immediately started misfiring. I put a wolf buffer spring in and this wolf extra strength hammer spring and problem solved. It instantly became completely reliable. No more problems runs like a top.

Lesen Sie 16 weitere Bewertungen bei brownells.com

20.9 62.9 3 EUR

Artikel-Nr.: 969000100
WOLFF Hammer Spring
Herstellerproduktnummer: 30093 Langlebige, aus Stahl gefertigte Federn sorgen für zusätzliche Schlagkraft des Hammers und gewährleisten damit eine zuverlässige Zündung bei jedem Abzug. Ersetzt die Werksfeder. Hinweis: Nur für die Verwendung in Halbautomatik-Modellen. Nicht geeignet für vollautomatische oder Feuerstoß-Modelle.

20.9 EUR 0 20,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.

Eigenschaften: Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Die WOLFF Hammerfeder bietet zusätzliche Schlagkraft und sorgt für zuverlässige Zündung bei jedem Abzug.
Die Feder ist aus langlebigem Stahl gefertigt und ersetzt die Werksfeder in Halbautomatik-Modellen des AR-15.
Die Feder ist nicht für vollautomatische oder Feuerstoß-Modelle geeignet.

Eigenschaften

Hersteller/Modell: AR-15 Versandgewicht: 0,005kg Versandhöhe: 15mm Versandbreite: 66mm Versandlänge: 132mm

Artikeldetails

Made in USA

Artikel-Nr.: 969000101
WOLFF Hammer Spring, 3-Pak
Herstellerproduktnummer: 30094 Langlebige, aus Stahl gefertigte Federn sorgen für zusätzliche Schlagkraft des Hammers und gewährleisten damit eine zuverlässige Zündung bei jedem Abzug. Ersetzt die Werksfeder. Hinweis: Nur für die Verwendung in Halbautomatik-Modellen. Nicht geeignet für vollautomatische oder Feuerstoß-Modelle.

34.9 EUR 3 34,90 € *

Lieferzeit ca. 1-4 Tage.
3 Stk. im lokalen Lager

Eigenschaften: Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Artikel-Nr.: 969000102
WOLFF Hammer Spring, 10-Pak
Herstellerproduktnummer: 30095 Langlebige, aus Stahl gefertigte Federn sorgen für zusätzliche Schlagkraft des Hammers und gewährleisten damit eine zuverlässige Zündung bei jedem Abzug. Ersetzt die Werksfeder. Hinweis: Nur für die Verwendung in Halbautomatik-Modellen. Nicht geeignet für vollautomatische oder Feuerstoß-Modelle.

62.9 EUR 0 62,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.

Eigenschaften: Hersteller/Modell: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

🔧 Verbessern Sie Ihre AR-15 mit der WOLFF Extra-Power Hammer Spring! Langlebiger Stahl für zuverlässige Zündung bei jedem Abzug. Ideal für Halbautomatik-Modelle. Jetzt entdecken!

Helps Eliminate Common Ignition Problems Great When Using Ammo With Hard Primers

SPECS: Steel. Approximately 23/32" (18.2mm) wide, 2" (5.1cm) long.

Mehr...

Hilft häufige Zündprobleme zu beseitigen - Ideal bei Munition mit harten Zündern

SPECS: Stahl. Ungefähr 23/32" (18.2mm) breit, 2" (5.1cm) lang.

Mehr...

Kundenbewertungen zu WOLFF Hammer Spring

Anzahl der Bewertungen: 16
Von brownells.com: 16
Durchschnittliche Bewertung: 4,7

No more Failure to Fire (13.01.2013)

Eliminate Failure to Fire in 7.62x39 upper with TULAmmo, and Chiappa .22 upper with remington ammo. Had Bushmaster lower parts kits. Heavier hammer was not required

Never misfire again (18.04.2016)

Made Improvement (04.07.2017)

Helped out my 7.62x39 upper. Just realize a side effect is that the bolt will be harder to pull back. Enough of difference that my wife and kid complain about it.

AF15 with milsurp 5.45 (11.08.2010)

Does work for AR15 Timney triggers (20.10.2010)

Tried this on my timney trigger after getting light strikes on primers and the spring is too large.

Significant reduction in misfires (02.04.2011)

I was experiencing a 30% misfire rate (6 out of 20) with steel-case ammo in my 7.62x39 custom AR15. Installing this spring helped significantly to reduce misfires.

Heavy Weight Hammer Spring (19.06.2011)

Harder to install because of the heavy spring but works like a champ and something needed for my AR 7.62x39.

Buying another for next build (22.06.2011)

Greatly Reduces Lock Time (03.10.2011)

These heavy weight hammer springs greatly reduce lock time in competition rifles. Replace your after market (RRA etc.) hammer spring with one of these. Your scores will go up, especially in off hand!

Great for your .50BMG lower (19.03.2012)

This was exactly what was needed for my lower that I used for a BOHICA .50BMG upper.

Completely fixed my problem! (04.10.2012)

Reduces lock time. (19.11.2012)

Fixed CMMG .22LR Conversion Problem (15.05.2013)

I had about 80% of rounds fail to fire using my CMMG .22LR conversion bolt. This spring brought that rate down to around 3%.

Will fix the problem (20.03.2016)

GOOD PRODUCT, GREAT RESULTS. (03.05.2017)

Immediately solved my light strike no pr (23.09.2017)

Lesen Sie 16 weitere Bewertungen bei brownells.com

Kunden kauften auch

BROWNELLS M4 Buffer Spring (CS), each
BROWNELLS AR-15/M16 BUFFER SPRINGS

BROWNELLS

Bestellbar, nicht vorrätig

19,40 € * 19,40 € - 39,90 €*

Schließfedern

BROWNELLS AR-15 Extractor Spring (CS), 3-Pak
BROWNELLS AR-15/M16 EXTRACTOR SPRINGS

BROWNELLS

Auf Lager

22,90 € * 18,40 € - 22,90 €*

Auszieherfeder

BROWNELLS Trigger Spring, each
BROWNELLS AR-15 TRIGGER SPRINGS

BROWNELLS

Auf Lager

13,40 € * 13,40 € - 19,30 €*

Abzugsfedern

BROWNELLS M16 (8-36 Threads) Chamber Brush
BROWNELLS M16 & AR-15 CHAMBER BRUSHES

BROWNELLS

Auf Lager

19,00 € * 14,20 € - 19,00 €*

Patronenlagerbürsten

4,8

TTI INTL Firing Pin Retainer Pin
TTI INTL AR-15/M16 FIRING PIN RETAINING PIN FIVE PACK

TTI INTL

Bestellbar, nicht vorrätig

20,90 € *

Schlagbolzenretainer

4,5

Anmeldung

Kennwort vergessen?
Registrieren

Links

Produktkategorien

Kontakt

Kontaktformular
+49(0)4321 / 5562358 Mo.-Fr. 09-12 und 14-15 Uhr
Händler werden?
Karriere

Bestellen

Kundenservice

Unser Versprechen:

Ob Sportschütze, Jäger, Büchsenmacher, Militär oder Polizist, Waffen-Tüflter oder Enthusiast - bei uns bist du richtig! Keine Extrakosten für den Zoll, keine Probleme mit Importgenehmigungen und kein Mindestbestellwert.
Seit über 75 Jahren vertrauen unsere Kunden den qualitativ hochwertigen Waffen, Waffenteilen und dem Zubehör von Brownells. Bei uns findest du mehr als 50.000 Artikel, darunter einzigartige Waffenteile, Zubehör, Büchsenmacher-Werkzeuge, Munition und andere Produkte zur Wartung, Instandsetzung und Tuning deiner Waffen.