Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

YANKEE HILL MACHINE CO., INC.
PICATINNY BIPOD ADAPTER

100002072

Rock Solid Platform For Bipod Attachment

Lightweight, slimline design eliminates the clunky extra baggage look that goes along with trying to mate a bipod to a AR-15/M16 handguard. The rugged, aluminum platform with fixed attachment stud provides a superior fit to Weaver or Picatinny, accessory rails. Two hex-head crossbolts give uniform clamping pressure, so adapter remains rock solid while shooting. Specifically contoured to accept Harris and similar bipods that attach to a swivel stud.

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Mehr...

Felsenfeste Plattform für Bipod-Befestigung

Das leichte, schlanke Design eliminiert den klobigen zusätzlichen Gepäcklook, der entsteht, wenn man versucht, ein Bipod an einen AR-15/M16-Handschutz anzupassen. Die robuste Aluminium-Plattform mit festem Befestigungsstift sorgt für eine überlegene Passform an Weaver- oder Picatinny-Zubehörschienen. Zwei Innensechskant-Kreuzbolzen bieten gleichmäßigen Klemmdruck, sodass der Adapter beim Schießen absolut stabil bleibt. Speziell geformt, um Harris und ähnliche Bipods zu akzeptieren, die an einem Schwenkbolzen befestigt werden.

SPECS: Flugzeug-Aluminium, harteloxiert, matte schwarze Oberfläche. 2-5/8" (6,7 cm) lang, 1¼" (3,2 cm) breit, 5/8" (1,6 cm) hoch. 2,2 oz. (62 g) Gewicht.

Mehr...

Kundenbewertungen zu YANKEE HILL MACHINE CO., INC. Picatinny Bipod Adapter

Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,4

Bipod mount/ sling mount (09.11.2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08.04.2010)

I use this to hold my Harris bipod to my M&P 15-22. This is a once piece clamping design that I was not able to loosen enough to slide the adapter onto the rail from the side so one has to slip it on from the end. This is its only limitation. It is well made, clamps tightly, works well in holding my Harris bipod solidly to the forerail and is of good quality manufacturing. It has two screw tighening which was important to me. I did not feel one screw was enough.

Not on just any rail (16.02.2011)

I like the idea of the product. Its solid if it can go on. I put it on a cheap plastic rail. I finally got around to free floating my AR with a YHM free float rail, yeah it does fit on its own rail products. It is possible putting it on the cheap rail cinch it down making it impossible to install on the aluminum one later, but I doubt it.

The perfect match for Harris bipod (04.10.2011)

The YHM bipod adapter is perfectly tailored for the Harris bipod. The swivel stud that connects to the bipod is precisely located to center the base of the bipod when installed. Similar accessories has their stud located at the center of the adapter offsetting the position of the bipod when installed. This is a minor flaw and in no way affects the operation of the bipod. It does however affects the overall aesthetics. It goes to show that YHM did their homework when they designed this gadget. Great job, great price. Higly recommended. A QD version will be a great addition to this line up.

I WOULD BUY THIS UNIT AGAIN. (08.01.2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04.04.2012)

This is a solidly made adapter milled out of a single piece of aluminum. It does not have a separate clamping bar, but appears to depend on a cut halfway through the adapter to give some "spring" to one side. However, it can't really be spread apart. It can not be installed by rotating it from the side over the rail, and it was too narrow to slide onto my rail from the end.

I am returning this product for another after I talk to a Brownell's technician.

TIGHT FIT (10.01.2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Lesen Sie 7 weitere Bewertungen bei brownells.com

39.9 39.9 1 EUR

Artikel-Nr.: 100002072
YANKEE HILL MACHINE CO., INC. Picatinny Bipod Adapter
Herstellerproduktnummer: YHM-638 Das leichte, schlanke Design eliminiert den klobigen zusätzlichen Gepäcklook, der entsteht, wenn man versucht, ein Bipod an einen AR-15/M16-Handschutz anzupassen. Die robuste Aluminium-Plattform mit festem Befestigungsstift sorgt für eine überlegene Passform an Weaver- oder Picatinny-Zubehörschienen. Zwei Innensechskant-Kreuzbolzen bieten gleichmäßigen Klemmdruck, sodass der Adapter beim Schießen absolut stabil bleibt. Speziell geformt, um Harris und ähnliche Bipods zu akzeptieren, die an einem Schwenkbolzen befestigt werden.

39.9 EUR 0 39,90 € *

Nicht verfügbar.

Eigenschaften: Anwendung: Swivel Stud Mount Attachment: Picatinny

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Das schlanke Design reduziert unhandliches Gepäck beim Anbringen eines Zweibeins an deinem AR-15 / M16.
Die robuste Aluminiumplattform sorgt für eine hervorragende Passform auf Weaver- oder Picatinny-Schienen.
Der Adapter bleibt beim Schießen stabil dank der zwei Sechskant-Querbolzen, die gleichmäßigen Klemmdruck bieten.

Eigenschaften

Anwendung: Swivel Stud Mount Attachment: Picatinny Versandgewicht: 0,068kg Versandhöhe: 13mm Versandbreite: 25mm Versandlänge: 86mm

Artikeldetails

Made in USA

Entdecke den YANKEE HILL Picatinny Bipod Adapter für eine stabile und leichte Verbindung. Ideal für dein AR-15! 🛠️

Rock Solid Platform For Bipod Attachment

SPECS: Aircraft-grade aluminum, hardcoat anodized, matte black finish. 2-5/8" (6.7cm) long, 1¼" (3.2cm) wide, 5/8" (1.6cm) high. 2.2 oz. (62g) wt.

Mehr...

Felsenfeste Plattform für Bipod-Befestigung

SPECS: Flugzeug-Aluminium, harteloxiert, matte schwarze Oberfläche. 2-5/8" (6,7 cm) lang, 1¼" (3,2 cm) breit, 5/8" (1,6 cm) hoch. 2,2 oz. (62 g) Gewicht.

Mehr...

Kundenbewertungen zu YANKEE HILL MACHINE CO., INC. Picatinny Bipod Adapter

Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 3,4

Bipod mount/ sling mount (09.11.2009)

Very solid steel mount that has double cross bars.
Heavier than others and takes up more space.

Yankee Hill Bipod Adapter (08.04.2010)

Not on just any rail (16.02.2011)

The perfect match for Harris bipod (04.10.2011)

I WOULD BUY THIS UNIT AGAIN. (08.01.2012)

UNIT IS EXACTLY AS STATED, A BREEZE TO INSTALL AND THE MENTIONED OFF SET FIT PERFECTLY ON MY ARMALITE .308

Did Not Fit My Picatinny Rail (04.04.2012)

TIGHT FIT (10.01.2015)

some rails this slides right on. the last rail I put it on had to use a plastic mallet to send it home. I don't have a problem doing this. I rather have it on the tight side than be loose.

Lesen Sie 7 weitere Bewertungen bei brownells.com