Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup “iron” sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Mehr...
Montiere ein Zielgerät & behalte die Eisenvisierungen
Leichte Aluminium-Picatinny-Schiene ersetzt die Werksrippe/hintere Visierung und ermöglicht es dir, ein Optik zu montieren, während du den Vorteil der Backup „Eisen“ Visierungen behältst. Acht Querslots ermöglichen es dir, die Optik für die beste Augenabstände zu positionieren. Integrierte offene hintere Visierung lässt sich in Windage und Elevation einstellen. Vorgebohrt, um der Werkslochabstände zu entsprechen und die originalen Werksrippen/hinteren Visierungsschrauben zu verwenden.
TECHNISCHE DATEN: 6061 T6 Aluminium, harteloxiert, matt schwarz. Ungefähr 5" (12,7cm) lang, 13⁄16" (21mm) breit, 15⁄32" (12mm) hoch vom oberen Teil des Empfängers.
Mehr...
Kundenbewertungen zu TACTICAL SOLUTIONS, LLC Picatinny Scope Mount
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7
Buckmark Tactical Solutions Rail(24.02.2011)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(02.06.2011)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(30.01.2013)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).
Artikel-Nr.: 100005205 TACTICAL SOLUTIONS, LLC Picatinny Scope Mount Herstellerproduktnummer: BMSR-INT879971001350 Leichte Aluminium-Picatinny-Schiene ersetzt die Werksrippe/hintere Visierung und ermöglicht es dir, ein Optik zu montieren, während du den Vorteil der Backup „Eisen“ Visierungen behältst. Acht Querslots ermöglichen es dir, die Optik für die beste Augenabstände zu positionieren. Integrierte offene hintere Visierung lässt sich in Windage und Elevation einstellen. Vorgebohrt, um der Werkslochabstände zu entsprechen und die originalen Werksrippen/hinteren Visierungsschrauben zu verwenden.
149.9EUR5149,90 €
*
Lieferzeit ca. 14-21 Tage. 5 Stk. im Großlager
Eigenschaften:Art: PicatinnyBasenanzahl: 1-PieceFarbe: BlackHersteller: BrowningMaterial: AluminumModell: Buck Mark
Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup “iron” sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Mehr...
Montiere ein Zielgerät & behalte die Eisenvisierungen
Leichte Aluminium-Picatinny-Schiene ersetzt die Werksrippe/hintere Visierung und ermöglicht es dir, ein Optik zu montieren, während du den Vorteil der Backup „Eisen“ Visierungen behältst. Acht Querslots ermöglichen es dir, die Optik für die beste Augenabstände zu positionieren. Integrierte offene hintere Visierung lässt sich in Windage und Elevation einstellen. Vorgebohrt, um der Werkslochabstände zu entsprechen und die originalen Werksrippen/hinteren Visierungsschrauben zu verwenden.
TECHNISCHE DATEN: 6061 T6 Aluminium, harteloxiert, matt schwarz. Ungefähr 5" (12,7cm) lang, 13⁄16" (21mm) breit, 15⁄32" (12mm) hoch vom oberen Teil des Empfängers.
Mehr...
Kundenbewertungen zu TACTICAL SOLUTIONS, LLC Picatinny Scope Mount
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7
Buckmark Tactical Solutions Rail(24.02.2011)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(02.06.2011)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(30.01.2013)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).