Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

BROWNELLS
CAN'T MAR™ 1911 AUTO BUSHING WRENCH

050806102200 080045045

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar™ wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar™ wrench carries easily in pocket or field kit.

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Mehr...

Kann Oberflächen nicht beschädigen - Praktisch unzerbrechlich - Taschenformat - Vielseitiges, doppelseitiges Design

Jeder 1911-Besitzer und jede Waffenschmiede benötigt einen Schraubenschlüssel, um die Laufbuchse von den 1911 Autos zu entfernen. Unser Schlüssel passt auf alle Kaliber und Variationen; Colt-gefertigt (einschließlich der Fabrik Officers ACP) sowie Nachbauten. Hergestellt aus super robustem ABS "T"-Polymer, hat der Brownells Can't Mar™ Schraubenschlüssel mehr Dicke und Gewicht als andere synthetische Schraubenschlüssel. Er entfernt selbst die am festesten sitzenden, match-grade Buchsen, OHNE die Oberfläche der Buchse oder des Schlittens der Waffe zu verkratzen oder zu beschädigen. Praktisch unzerbrechlich, lässt sich der Can't Mar™ Schraubenschlüssel leicht in der Tasche oder im Feldkit transportieren.

SPECS: 5½" (14,0cm) lang. 1¼" (3,2cm) breit. .187" (4,75mm) dick. Wiegt 1 oz. (28,3gm).

Mehr...

Kundenbewertungen zu BROWNELLS Can't Mar Wrench

Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 3

Worked once....almost (22.08.2009)

I bought one of these for my Colt Officers ACP. The wrench plastic just deformed on the first use, didn't remove the bushing, and was useless from then on. The bushing is fairly snug on my .45 so maybe that's why it didn't work. Good idea but did not work for me. A waste of my [$] and not worth the cost of returning.

Disappointed.... (14.10.2009)

It worked splendidly a handful of times. After a couple of uses it starts to get seriously chewed up and malformed, leaving bits of orange plastic all down in the guide rod area of the gun. After about 10 uses it was so chewed up it would not successfully break down the gun.

Good tool at a fair price (01.11.2009)

I like this plastic tool better than the Brownells steel Colt wrench because it is light and scratch proof. It does mar slightly because it is plastic. Unless you have super tight bushings, it works perfectly. If you have super tight bushings, you may need the aluminum bushing wrench.

Works Great, Will Not Damage Gun (24.04.2010)

Works great, will not mar finish and holds up Great. have used one in my shop for years and have taken down 100's of 1911's with it, from time to time I have run across a gun with a spring cap, bushing or a slide that has a bur and it can leave a mark on it but that is not the fault of the tool. and if the tool where to brake they are so inexpensive that I would not hesitate to purchase a replacement.

Great Finish Saver (16.08.2010)

This bushing wrench is a real finish saver.. after struggling with an SA Pro bushing, can't imagine what damage may have resulted without it. Although it does shed a little plastic and seems somewhat consumable.. it's well worth every penny compared to refinishing.

It works but has limits (10.10.2010)

The good thing about this plastic wrench is that it doesn't mar the finish, and of course, you probably won't misplace it.

If you have a tight, accurized bushing, as I do, it won't last more than a few times before it gets chewed up. But for the price, buy a few of them.

Doesn't mar your pistols. (09.04.2011)

This tool does what it says but is a little on the soft side for tight bushings. I tore mine up pretty good when fitting a Wilson Combat bushing into my wife's Colt Officers model 1911. The wilson bushing is very tight fitting(good, good,good) after fitting for accuracy. I've recently up graded to the aluminum version.

Good Bushing Wrench and will not damage! (26.03.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06.09.2012)

I purchased 2 wrenches but found the tolerances are sloppy for a standard 1911 A1 recoil bushing. Trying to make it fit caused the wrench to slip and the recoil spring plug to go flying off the workbench. Cost to replace the plug plus freight about $16. Recommend to step up to the metal wrench.

Good For The Price (06.05.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06.07.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.09.2014)

Wears out very fast if you have a tight fitting bushing, this won't last long at all. Material is very soft and won't mar the gun but won't last long at all. On the first use, lots of mat'l chipped away from the tool. I imagine after about three uses it would be junk.

Also, so soft that it flexes so much that you can hardly hold the spring plug down enough to turn the bushing enough to lock back in place but it doesn't scratch your weapon at all.

I have now got the brownells enhanced bushing wrench with the flange that retains the recoil spring plug as you twist the bushing free, Great tool and won't scratch your weapon as it is made of aluminum. Well worth the extra money, remember you get what you pay for.

Should have gotten one sooner (06.09.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Lesen Sie 14 weitere Bewertungen bei brownells.com

17.9 17.9 1 EUR

Artikel-Nr.: 080045045
BROWNELLS Can't Mar Wrench
Herstellerproduktnummer: 080045045 050806102200 Jeder 1911-Besitzer und jede Waffenschmiede benötigt einen Schraubenschlüssel, um die Laufbuchse von den 1911 Autos zu entfernen. Unser Schlüssel passt auf alle Kaliber und Variationen; Colt-gefertigt (einschließlich der Fabrik Officers ACP) sowie Nachbauten. Hergestellt aus super robustem ABS "T"-Polymer, hat der Brownells Can't Mar™ Schraubenschlüssel mehr Dicke und Gewicht als andere synthetische Schraubenschlüssel. Er entfernt selbst die am festesten sitzenden, match-grade Buchsen, OHNE die Oberfläche der Buchse oder des Schlittens der Waffe zu verkratzen oder zu beschädigen. Praktisch unzerbrechlich, lässt sich der Can't Mar™ Schraubenschlüssel leicht in der Tasche oder im Feldkit transportieren.

17.9 EUR 543 17,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Hersteller: 1911 Modell: Government, Commander, Officers

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Brownells Can't Mar™ Wrench ist ideal für jeden 1911-Besitzer und Waffengeschäft, um Laufbuchsings zu entfernen.
Er ist aus robustem ABS "T"-Grad-Polymer gefertigt und bietet mehr Dicke und Gewicht als andere synthetische Schlüssel.
Der Schlüssel entfernt selbst festsitzende Match-Grade-Bushings ohne Kratzer oder Beschädigungen am Finish.

Eigenschaften

Hersteller/Modell: 1911 Modell: Government,Commander,Officers Versandgewicht: 0,023kg Versandhöhe: 13mm Versandbreite: 79mm Versandlänge: 150mm UPC : 050806102200

Artikeldetails

Made in USA

Der BROWNELLS Can't Mar™ 1911 Auto Bushing Wrench ist der perfekte Schraubenschlüssel für jeden 1911-Besitzer! 🔧 Robust und kratzfrei!

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Mehr...

Kann Oberflächen nicht beschädigen - Praktisch unzerbrechlich - Taschenformat - Vielseitiges, doppelseitiges Design

SPECS: 5½" (14,0cm) lang. 1¼" (3,2cm) breit. .187" (4,75mm) dick. Wiegt 1 oz. (28,3gm).

Mehr...

Kundenbewertungen zu BROWNELLS Can't Mar Wrench

Anzahl der Bewertungen: 14
Von brownells.com: 14
Durchschnittliche Bewertung: 3

Worked once....almost (22.08.2009)

Disappointed.... (14.10.2009)

Good tool at a fair price (01.11.2009)

Works Great, Will Not Damage Gun (24.04.2010)

Great Finish Saver (16.08.2010)

It works but has limits (10.10.2010)

Doesn't mar your pistols. (09.04.2011)

Good Bushing Wrench and will not damage! (26.03.2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06.09.2012)

Good For The Price (06.05.2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06.07.2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13.09.2014)

Should have gotten one sooner (06.09.2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10.12.2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Lesen Sie 14 weitere Bewertungen bei brownells.com