Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

JENTRA
GRIP PLUG for GLOCK®

820103357203 463100017

Keeps Dirt Out of Grip Frame

Snaps into the opening at the rear of the Glock® grip frame for a cleaner appearance, plus keeps dust, dirt, snow and water out of the gun. Creates a perfect location for adding extra weight to competition guns or to counter recoil on light, carry guns. Easily removed, does not alter gun. See specs for proper fit to your model of Glock.

SPECS: JP-1 Fits Gen 3 models: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Fits Gen 3 models: 26, 27, 33.

Mehr...

Hält Schmutz aus dem Griffrahmen fern

Schnappt in die Öffnung an der Rückseite des Glock®-Griffrahmens für ein saubereres Erscheinungsbild und hält Staub, Schmutz, Schnee und Wasser fern von der Waffe. Schafft einen perfekten Platz, um zusätzliches Gewicht für Wettkampfwaffen hinzuzufügen oder um Rückstoß bei leichten, tragbaren Waffen auszugleichen. Lässt sich leicht entfernen und verändert die Waffe nicht. Siehe Spezifikationen für die richtige Passform zu deinem Glock-Modell.

SPECS: JP-1 Passt für Gen 3 Modelle: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Passt für Gen 3 Modelle: 26, 27, 33.

Mehr...

Kundenbewertungen zu JENTRA Fits Glock®

Anzahl der Bewertungen: 20
Von brownells.com: 19
Durchschnittliche Bewertung: 4,2

très satisfait (16.03.2020)

Gen 4 Grip plug (19.02.2015)

After three month on my hip, the grip on my Gen4 G23 had a substantial amount of lint filling the rear void behind the magazine. I installed the grip plug to keep foreign matter out of the trigger mechanism and it seems to be working nicely. If there were anything negative about filling this void, it might be that this plug could slow an emergency reload, creating delays if the magazine failed to drop free as the pre-plug void in the grip allows my thumb to securely grab the magazine and strip it free; this is especially true during type 3 malfunction drills. However, in normal use my G23 has never failed to freely drop magazines... so I'll keep the plug and take my chances.

Must Have (29.01.2017)

glock 21 "SF" (08.07.2010)

SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.

Does NOT fit 21 SF (31.03.2012)

this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.

Waste of money (11.09.2017)

Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.

Fits that hole PERFECTLY (18.11.2009)

This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun.
picture does not do it justice.

Great Fit (06.08.2010)

Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW

Excellent!!! (03.09.2010)

Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]

Hole is plugged. (26.07.2011)

Fit my 21 perfectly.

looks great!! (30.07.2012)

fit like a glove, very easy to put in, a must have for a good price!

Fits like it was made by GLOCK (24.02.2013)

Fit my G22 perfectly!

Perfect Fit (23.08.2013)

Looks and fits like a factory part

Does not fit in Glock 20SF (19.03.2014)

This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.

Stays put (04.09.2016)

I bought 3 of them for my guns, one 2nd generation and two 3rd generation. They don't add any length, look good and fit tightly in all models without getting in the way of the magazine. Easy to put in and take out.

perfect addition (11.10.2009)

just enough to fill the hand out, but still keeps it's low profile for perfect concealment.

Bad Design - Causes magazines to snag (21.01.2014)

The JP-3 plug is a poor design. It install easily enough, but creates a ledge with the bottom of the magazine well which will cause the back end of your magazine to snag during reloading. A Glock grip plug should create a smooth snag-free surface to facilitate reloads. A little extra plastic bevel is all that is needed. This model stinks.

great fit and good price (10.09.2016)

Will tell glock here in Mesa where to get them

Great buy (08.12.2011)

Installs in seconds with a perfect fit for the G26. It keeps the gun sealed up so lint and dirt etc. will not get to the action or anything. I use the gun as a carry gun and got sick of cleaning crud out of the grip on a weekly basis and this does the trick. For the price you can't go wrong and will pay for it's self in no time at all. Just from not having to clean it out all the time and cleaning supplies

Glock plug (07.01.2012)

One of the best investments a Glock owner can make.

Lesen Sie 19 weitere Bewertungen bei brownells.com

13.9 13.9 1 EUR

Artikel-Nr.: 463100017
JENTRA Fits Glock®
Herstellerproduktnummer: JP-1 820103357203 Schnappt in die Öffnung an der Rückseite des Glock®-Griffrahmens für ein saubereres Erscheinungsbild und hält Staub, Schmutz, Schnee und Wasser fern von der Waffe. Schafft einen perfekten Platz, um zusätzliches Gewicht für Wettkampfwaffen hinzuzufügen oder um Rückstoß bei leichten, tragbaren Waffen auszugleichen. Lässt sich leicht entfernen und verändert die Waffe nicht. Siehe Spezifikationen für die richtige Passform zu deinem Glock-Modell.

13.9 EUR 0 13,90 € *

Benachrichtigt werden, sobald verfügbar? Hier klicken

Nicht verfügbar.

Eigenschaften: Hersteller: Glock Modell: 21, 20, 17, 19, 22, 23, 24, 25, 34, 35, 31, 32

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Rastet in die Öffnung am hinteren Ende des Glock® Griffrahmens ein und hält Staub, Schmutz, Schnee sowie Wasser fern.
Schafft eine perfekte Stelle für zusätzliches Gewicht oder zur Kompensation des Rückstoßes bei leichten Waffen.
Leicht entfernbar und verändert die Waffe nicht; siehe Spezifikationen für die richtige Passform für dein Glock-Modell.

Eigenschaften

Hersteller/Modell: Glock Modell: 21,20,17,19,22,23,24,25,34,35,31,32 Versandgewicht: 0,005kg Versandbreite: 83mm Versandlänge: 146mm UPC : 820103357203

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Verbessere dein Glock®-Erlebnis mit dem JENTRA GRIP PLUG! 🛡️ Schützt vor Schmutz und bietet zusätzlichen Platz für Gewicht. Perfekte Passform!

Keeps Dirt Out of Grip Frame

SPECS: JP-1 Fits Gen 3 models: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Fits Gen 3 models: 26, 27, 33.

Mehr...

Hält Schmutz aus dem Griffrahmen fern

SPECS: JP-1 Passt für Gen 3 Modelle: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Passt für Gen 3 Modelle: 26, 27, 33.

Mehr...

Kundenbewertungen zu JENTRA Fits Glock®

Anzahl der Bewertungen: 20
Von brownells.com: 19
Durchschnittliche Bewertung: 4,2

très satisfait (16.03.2020)

Gen 4 Grip plug (19.02.2015)

Must Have (29.01.2017)

glock 21 "SF" (08.07.2010)

SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.

Does NOT fit 21 SF (31.03.2012)

this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.

Waste of money (11.09.2017)

Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.

Fits that hole PERFECTLY (18.11.2009)

This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun.
picture does not do it justice.

Great Fit (06.08.2010)

Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW

Excellent!!! (03.09.2010)

Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]

Hole is plugged. (26.07.2011)

Fit my 21 perfectly.

looks great!! (30.07.2012)

fit like a glove, very easy to put in, a must have for a good price!

Fits like it was made by GLOCK (24.02.2013)

Fit my G22 perfectly!

Perfect Fit (23.08.2013)

Looks and fits like a factory part

Does not fit in Glock 20SF (19.03.2014)

This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.

Stays put (04.09.2016)