English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Mehr...
Die meisten "Parallel", die wir gefunden haben
In England hergestellt mit wärmebehandelten, flachen Backen. Das Modell mit glatten Backen bietet einen festen, nicht-markierenden Halt. Das gezahnte Modell hält fest und verfügt über eine längs verlaufende Rille, um Draht oder gebohrte Stangen zu halten.
Kundenbewertungen zu GROBET FILE CO. OF AMERICA INC Serrated Parallel Pliers
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 5
Would buy this product again and again(14.10.2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20.01.2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01.09.2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25.01.2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.
Artikel-Nr.: 348181103 GROBET FILE CO. OF AMERICA INC Serrated Parallel Pliers Herstellerproduktnummer: 1811030501869500071 In England hergestellt mit wärmebehandelten, flachen Backen. Das Modell mit glatten Backen bietet einen festen, nicht-markierenden Halt. Das gezahnte Modell hält fest und verfügt über eine längs verlaufende Rille, um Draht oder gebohrte Stangen zu halten.
38.9EUR1338,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Artikel-Nr.: 348181105 GROBET FILE CO. OF AMERICA INC Flat Nose Smooth Jaw Parallel Pliers Herstellerproduktnummer: 46.512501869500054 In England hergestellt mit wärmebehandelten, flachen Backen. Das Modell mit glatten Backen bietet einen festen, nicht-markierenden Halt. Das gezahnte Modell hält fest und verfügt über eine längs verlaufende Rille, um Draht oder gebohrte Stangen zu halten.
English-made with heat-treated, flat-nosed jaws. Smooth-jawed model gives a tight, non-marking grip. Serrated model holds tightly and includes a lengthwise groove to hold wire or drilled rod.
SPECS: Both; 5" (12.7cm) long, 1-1/8" (2.9cm) deep throat, open to 7/16" (11.1mm) wide. Nickel plated handles, blued jaws.
Mehr...
Die meisten "Parallel", die wir gefunden haben
In England hergestellt mit wärmebehandelten, flachen Backen. Das Modell mit glatten Backen bietet einen festen, nicht-markierenden Halt. Das gezahnte Modell hält fest und verfügt über eine längs verlaufende Rille, um Draht oder gebohrte Stangen zu halten.
Kundenbewertungen zu GROBET FILE CO. OF AMERICA INC Serrated Parallel Pliers
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 5
Would buy this product again and again(14.10.2009)
Excellent quality..The best I've seen in a long time..The jaws are perfectly parralel the full length and come together so perfectly they will hold a single piece of paper!Perfect size for working with guns of any kind. A little pricey but worth it for the quality!
Smooth Jaw Pliers(20.01.2016)
I have several sets of Barnard Pliers that I have been lucky enough to source from the U.S.A.
Most of these pliers have serrated jaws, which are fine for most work and with the addition of a smooth jaw set I have all of the bases covered. There is no substitute for quality tools.
I use my serrated parallels for precise placement of dowel pins when I get ready to press them into place, and also to extract pins too. I have carefully shaped small diameter spring wire using them as well. I keep them very close nearby my vise because I reach for them all the time. The jaws are tough and the handles fit well into the palm of my hand.
Serrated parallel jaw pliers(01.09.2011)
The description needs to have a drawing or picture of serrations and groove dimensions
NICE tool!(25.01.2013)
Recently, I used the serrated jaw pliers to install a Badger Ordinance Tactical Latch lever (093-249-020WB). The pin/wire relief in the one jaw made the job a cinch.
(If you're interested, I reviewed my installation and use of the pliers on that page.)
While a bit pricey, having the right tool for the job--and a well-made tool--is priceless. They are heavy for being so small, but just the right size for firearms work.