HORNADY
LOCK-N-LOAD BULLET COMPARATOR BASIC SET

090255704051 749004951

The Stoney Point Chamber-All Bullet Comparator body attaches to the blade of your caliper with a small thumbscrew and utilizes inserts for each caliber. The design of this tool allows proper alignment when used with the stoney Point Chamber-All OAL gauge (offset position), or it can be used in a conventional centerline method. Inserts are sold separately, or the tool can be purchaed with six inserts as a kit. The body can also be used with to hold the Stoney Point headspace gage inserts.

Mehr...

Der Stoney Point Chamber-All Bullet Comparator Körper wird mit einer kleinen Daumenschraube am Blatt deines Messschiebers befestigt und nutzt Einsätze für jedes Kaliber. Das Design dieses Werkzeugs ermöglicht eine korrekte Ausrichtung, wenn es mit dem Stoney Point Chamber-All OAL-Messgerät (versetzte Position) verwendet wird, oder es kann in einer herkömmlichen Mittelachsen-Methode eingesetzt werden. Einsätze werden separat verkauft, oder das Werkzeug kann mit sechs Einsätzen als Set erworben werden. Der Körper kann auch verwendet werden, um die Stoney Point Headspace Gauge Einsätze zu halten.

Mehr...

Kundenbewertungen zu HORNADY Lock-N-Load Comparator Set

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 5

Must Have for Precision Shooters (26.02.2011)

I purchased this product because I wanted to obtain very precise measurements with my Hornady Lock-N-Load OAL Guage. I like this product because the inserts enable me to take accurate measurements from the ogive as opposed to the tip of the bullet.

Get the Set (21.01.2012)

Yes, you can buy all these parts separately, but let's face it-- you'll eventually need the size you don't have. Get the full set, it's worth it. (And, yes, the Hornady comparator works perfectly!)

Great Tool & Highly Recommended!!! (10.06.2012)

I decided to order this comparator when I purchased my Remington 700 SPS Tactical (.308). When I bought this rifle, I wanted to take my reloading a step further and dive into the world of precision hand loads. Up to this point, I was reloading rounds mostly for target practice and a few for hunting every year. So the reloading gear I own was sufficient enough to get the job done, but not for higher quality hand loads. But as I began realizing how challenging precision hand loading can be, I knew that I would have to reach out and get some reloading equipment that could help me get the job done.

Due to the fact that I had no experience with the tools needed for this type of work, I simply called into Sinclair International and spoke with one of their many highly experienced reloading techs. He couldn't have been more helpful in explaining about important tools, explaining how and why they worked. As you may have guessed, he suggested this comparator as an essential tool for the entire process.

This comparator can be ordered by itself or with six inserts for different calibers. Being that I have several different calibers, I figured why not buy the kit and not have to get the other inserts later. The Comparator simply attaches to the blade on your caliber with a small brass set screw. The cut out in the comparator can be used for an inline OAL gauge or an offset OAL gauge. This is achieved by removing the brass set screw from one side of the body to the other side. Changing the set screw will make the comparator sit either in-line or offset which came in really handy.

The inserts are also just as easy to install and remove. Depending on which caliber you are reloading for, pick that insert and slide it into the top of the comparator body. It is then secured with a steel Allen screw (Allen key included). Changing from caliber to caliber is a breeze and can be done in seconds.

The best part about this comparator, is that it can be used to measure your bullet's OAL from the bullet's ogive. Measuring from the bullet tip is usually not reliable and measurements can sometimes vary from as much as .025" off from tip to tip, even with very high quality projectiles. The ogive gives a much more consistent measurement, which is especially important for precision hand loading.

This comparator goes great with the Hornady OAL gauges (straight and curved shaft) which makes the reloading process even that much more reliable and consistent. The last thing good about this comparator, is that it can be used with headspace gauge inserts as well. I would highly recommend this for anyone looking to get the best hand loads for their rifles. What a great product! Get one, you will not be disappointed!

Lesen Sie 3 weitere Bewertungen bei brownells.com

47.9 47.9 1 EUR

Artikel-Nr.: 749004951
HORNADY Lock-N-Load Comparator Set
Herstellerproduktnummer: B234 090255704051 Der Stoney Point Chamber-All Bullet Comparator Körper wird mit einer kleinen Daumenschraube am Blatt deines Messschiebers befestigt und nutzt Einsätze für jedes Kaliber. Das Design dieses Werkzeugs ermöglicht eine korrekte Ausrichtung, wenn es mit dem Stoney Point Chamber-All OAL-Messgerät (versetzte Position) verwendet wird, oder es kann in einer herkömmlichen Mittelachsen-Methode eingesetzt werden. Einsätze werden separat verkauft, oder das Werkzeug kann mit sechs Einsätzen als Set erworben werden. Der Körper kann auch verwendet werden, um die Stoney Point Headspace Gauge Einsätze zu halten.

47.9 EUR 0 47,90 € *

Wird nach Ihrer Bestellung beim Lieferanten beschafft
Lieferzeit ca. 4-10 Wochen.

Eigenschaften: Kaliber: 243/6 mm (.243), 284/7 mm (.284), 30 Caliber (.308), 25 Caliber (.257), 270/6.8 mm (.277), 22 Caliber (.224)

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der HORNADY Lock-N-Load Bullet Comparator lässt sich einfach an deinem Messschieber befestigen.
Es sind Einsätze für verschiedene Kaliber erhältlich, sodass du die passenden für deine Bedürfnisse auswählen kannst.
Das Design ermöglicht eine korrekte Ausrichtung mit dem Stoney Point Chamber-All OAL-Messgerät oder in einer herkömmlichen Methode.

Eigenschaften

Kaliber: 25 Caliber (.257),270/6.8 mm (.277),284/7 mm (.284),30 Caliber (.308),22 Caliber (.224),243/6 mm (.243) Versandgewicht: 0,635kg Versandhöhe: 41mm Versandbreite: 112mm Versandlänge: 152mm UPC : 090255704051

Artikeldetails

Made in USA
No Export, dieses Produkt ist nur in Deutschland erhältlich.

Entdecke das HORNADY Lock-N-Load Bullet Comparator Set für präzise Messungen 🛠️. Ideal für verschiedene Kaliber und einfach zu bedienen!

Mehr...

Kundenbewertungen zu HORNADY Lock-N-Load Comparator Set

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 5

Must Have for Precision Shooters (26.02.2011)

Get the Set (21.01.2012)

Yes, you can buy all these parts separately, but let's face it-- you'll eventually need the size you don't have. Get the full set, it's worth it. (And, yes, the Hornady comparator works perfectly!)

Great Tool & Highly Recommended!!! (10.06.2012)

Lesen Sie 3 weitere Bewertungen bei brownells.com