Combination wrench holds the gas cylinder for easy gas plug removal without damage, plus the D-shaped hole prevents the piston from moving during cleaning. Small enough to store in a pocket when at the range or in the field. Machined from ½" thick aluminum, heat treated for extra strength, with a long-wearing baked-on mil-spec coating. Rounded edges ensure a comfortable grasp.
Entfernt das Gasventil & hält den Kolben zur Reinigung
Dieser Kombinationsschlüssel hält den Gaskolben fest, um das Gasventil ohne Beschädigung leicht entfernen zu können, und das D-förmige Loch verhindert die Bewegung des Kolbens während der Reinigung. Klein genug, um in einer Tasche auf dem Schießstand oder im Feld verstaut zu werden. Gefertigt aus ½" dickem Aluminium, wärmebehandelt für zusätzliche Stärke, mit einer langlebigen, eingebrannten mil-spec Beschichtung. Abgerundete Kanten sorgen für einen komfortablen Griff.
Kundenbewertungen zu SADLAK INDUSTRIES Gas Cylinder Wrench
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
QUALITY .(28.03.2014)
This wrench fit perfectly, it did not scratch or mar the rifle's finish. It was easy to use and is comfortable to use. Made out of thick lightweight aluminum it will stand up to a lifetime of use as long as you don't abuse it. worth every penny I paid for it.
m1-a gas cylinder wrench(15.03.2015)
did not fit. too small. had to use dremel tool to open up so it would fit .
Outstanding(03.08.2015)
Sadlak has made a wonderful tool to use. It doesn't mar the rifles finish, fits perfectly, and has a hole made for holding the gas piston for cleaning (again with out marring it). One of the best tools I've purchased.
This wrench will not fit all gas blocks(30.06.2018)
Just as an FYI Sadlak makes two different models of this wrench. The one listed for sale here will work with rifles that have GI forged gas blocks. If you have a late model rifle made by Springfield armory, with a cast gas block, this wrench will not fit over the gas block without enlarging the holes on this tool. Sadlak makes a different model of this wrench with larger openings that will fit over the cast gas blocks used by Springfield Armory, but nowhere is that stated in this ad.
Artikel-Nr.: 100005519 SADLAK INDUSTRIES Gas Cylinder Wrench Herstellerproduktnummer: 140100 Dieser Kombinationsschlüssel hält den Gaskolben fest, um das Gasventil ohne Beschädigung leicht entfernen zu können, und das D-förmige Loch verhindert die Bewegung des Kolbens während der Reinigung. Klein genug, um in einer Tasche auf dem Schießstand oder im Feld verstaut zu werden. Gefertigt aus ½" dickem Aluminium, wärmebehandelt für zusätzliche Stärke, mit einer langlebigen, eingebrannten mil-spec Beschichtung. Abgerundete Kanten sorgen für einen komfortablen Griff.
45.9EUR045,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.
Der Kombinationsschlüssel ermöglicht das einfache Entfernen des Gasventils ohne Beschädigung und hält den Gaskolben während der Reinigung fest.
Gefertigt aus 6061 T6 Aluminium mit mil-spec Beschichtung, ist das Werkzeug langlebig und robust.
Kompakte Größe von 6" Länge und 1½" Breite, ideal für die Aufbewahrung in einer Tasche auf dem Schießstand oder im Feld.
Eigenschaften
Hersteller/Modell:
Springfield
Modell:
M14,M1A
Versandgewicht: 0,113kgVersandhöhe: 10mmVersandbreite: 48mmVersandlänge: 198mm
Artikeldetails
Made in USA
Entfernen Sie das Gasventil Ihres M14/M1A mühelos mit dem SADLAK INDUSTRIES Gas Cylinder Wrench. Robust, kompakt und bequem zu handhaben. Jetzt entdecken! 🔧
Combination wrench holds the gas cylinder for easy gas plug removal without damage, plus the D-shaped hole prevents the piston from moving during cleaning. Small enough to store in a pocket when at the range or in the field. Machined from ½" thick aluminum, heat treated for extra strength, with a long-wearing baked-on mil-spec coating. Rounded edges ensure a comfortable grasp.
Entfernt das Gasventil & hält den Kolben zur Reinigung
Dieser Kombinationsschlüssel hält den Gaskolben fest, um das Gasventil ohne Beschädigung leicht entfernen zu können, und das D-förmige Loch verhindert die Bewegung des Kolbens während der Reinigung. Klein genug, um in einer Tasche auf dem Schießstand oder im Feld verstaut zu werden. Gefertigt aus ½" dickem Aluminium, wärmebehandelt für zusätzliche Stärke, mit einer langlebigen, eingebrannten mil-spec Beschichtung. Abgerundete Kanten sorgen für einen komfortablen Griff.
Kundenbewertungen zu SADLAK INDUSTRIES Gas Cylinder Wrench
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4
QUALITY .(28.03.2014)
This wrench fit perfectly, it did not scratch or mar the rifle's finish. It was easy to use and is comfortable to use. Made out of thick lightweight aluminum it will stand up to a lifetime of use as long as you don't abuse it. worth every penny I paid for it.
m1-a gas cylinder wrench(15.03.2015)
did not fit. too small. had to use dremel tool to open up so it would fit .
Outstanding(03.08.2015)
Sadlak has made a wonderful tool to use. It doesn't mar the rifles finish, fits perfectly, and has a hole made for holding the gas piston for cleaning (again with out marring it). One of the best tools I've purchased.
This wrench will not fit all gas blocks(30.06.2018)
Just as an FYI Sadlak makes two different models of this wrench. The one listed for sale here will work with rifles that have GI forged gas blocks. If you have a late model rifle made by Springfield armory, with a cast gas block, this wrench will not fit over the gas block without enlarging the holes on this tool. Sadlak makes a different model of this wrench with larger openings that will fit over the cast gas blocks used by Springfield Armory, but nowhere is that stated in this ad.