Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mehr...
Original Mil-Spec Kammerbürsten
Original militärisches Design, M16, mit 8-36 Gewinde für direktes Einschrauben in die "Reinigungsstange, Kleinwaffen", oder AR-15 mit 8-32 Gewinde, um in Standardstangen zu passen. AR-10 reinigt das größere .308 Kammer, das bei diesen Gewehren verwendet wird. Bronze Borsten passen in die Kammer, längere, rostfreie Stahlbüschel reinigen die Verriegelungsnuten.
SPECS: M16 - NSN 1005-00-999-1435, hat 8-36 Militärgewinde. Entspricht den Mil-Spec: MIL-B-20100C. AR-15 und AR-10 haben 8-32 Standardgewinde. M16 und AR-15 sind 37/8" (9,8 cm) insgesamt. AR-10, 4 3/8" (11,2 cm).
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 (8-32 Threads) Chamber Brush
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.
Artikel-Nr.: 084116015 BROWNELLS AR-15 (8-32 Threads) Chamber Brush050806111424 Original militärisches Design, M16, mit 8-36 Gewinde für direktes Einschrauben in die "Reinigungsstange, Kleinwaffen", oder AR-15 mit 8-32 Gewinde, um in Standardstangen zu passen. AR-10 reinigt das größere .308 Kammer, das bei diesen Gewehren verwendet wird. Bronze Borsten passen in die Kammer, längere, rostfreie Stahlbüschel reinigen die Verriegelungsnuten.
13.9EUR12313,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Artikel-Nr.: 084116016 BROWNELLS M16 (8-36 Threads) Chamber Brush050806002425 Original militärisches Design, M16, mit 8-36 Gewinde für direktes Einschrauben in die "Reinigungsstange, Kleinwaffen", oder AR-15 mit 8-32 Gewinde, um in Standardstangen zu passen. AR-10 reinigt das größere .308 Kammer, das bei diesen Gewehren verwendet wird. Bronze Borsten passen in die Kammer, längere, rostfreie Stahlbüschel reinigen die Verriegelungsnuten.
18.9EUR20118,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Artikel-Nr.: 084116025 BROWNELLS AR-10 Chamber Brush050806002418 Original militärisches Design, M16, mit 8-36 Gewinde für direktes Einschrauben in die "Reinigungsstange, Kleinwaffen", oder AR-15 mit 8-32 Gewinde, um in Standardstangen zu passen. AR-10 reinigt das größere .308 Kammer, das bei diesen Gewehren verwendet wird. Bronze Borsten passen in die Kammer, längere, rostfreie Stahlbüschel reinigen die Verriegelungsnuten.
14.9EUR48314,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Original military design, M16, with 8-36 thread for direct threading into the "Cleaning Rod, Small Arms", or AR-15 with 8-32 thread to fit standard rods. AR-10 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses.
SPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-10 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-10, 4 3/8" (11.2cm).
Mehr...
Original Mil-Spec Kammerbürsten
Original militärisches Design, M16, mit 8-36 Gewinde für direktes Einschrauben in die "Reinigungsstange, Kleinwaffen", oder AR-15 mit 8-32 Gewinde, um in Standardstangen zu passen. AR-10 reinigt das größere .308 Kammer, das bei diesen Gewehren verwendet wird. Bronze Borsten passen in die Kammer, längere, rostfreie Stahlbüschel reinigen die Verriegelungsnuten.
SPECS: M16 - NSN 1005-00-999-1435, hat 8-36 Militärgewinde. Entspricht den Mil-Spec: MIL-B-20100C. AR-15 und AR-10 haben 8-32 Standardgewinde. M16 und AR-15 sind 37/8" (9,8 cm) insgesamt. AR-10, 4 3/8" (11,2 cm).
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 (8-32 Threads) Chamber Brush
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
As Advertised(28.01.2010)
Works well to remove stubborn buildup, including that from lacquered ammo. Easy to use.
A basic cleaning brush and a must have!(30.03.2010)
Works well. Gets all that crud out of the chamber and lugs especially if you shoot cheap stuff like Wolf. I would buy 2 or 3 if you shoot a lot. Can't hurt to have spares.
A must have for every AR owner!(26.07.2011)
Best built brush I've used, is holding up well.
Good cleaning tool(12.10.2011)
This is great for the hard to reach chamber cleaning. The first time I cleaned my chamber I must've used 10,000 Q-tips. The chamber brush will help out w/ making cleaning easier and quicker.
Almost perfect (07.12.2015)
Everything was just right except the brass portion, with its uniform diameter, it's too long. It needs to reduce in diameter to accommodate the portion of the chamber that correlates to where the brass neck reduces towards the bullet. After you get it in there and mush the end down it fits alright. Also you'll need a pistol cleaning rod with a handle that does NOT rotate, otherwise you can't rotate the brush within the chamber to be effective. It takes a little use to get it shaped right.
Probably the most hated tool used in cleaning ARs. No matter what you do, you end up sticking fingers. All that aside this one does an excellent job of cleaning chamber and locking lugs.