Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.
SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.
Mehr...
Aktualisiere dein Vintage-Rimfire mit den Optiken deiner Wahl
Die Weaver-Schiene passt sich der Krümmung des Empfängers an und wird an den vorhandenen Montageschrauben befestigt, wodurch jedes Durchmesser-Zielfernrohr direkt über dem Lauf zentriert wird. Erlaubt die Montage von Vollformat-Zielfernrohren und Rotpunktvisieren. Bietet genügend Platz, um die originalen Kimme und Korn an ihrem Platz zu lassen. Einfache Installation: Entferne die Verschlussabdeckung, falls vorhanden, um den Verschluss über die Montage zu führen; füge Ringe und das gewünschte Zielfernrohr hinzu.
SPECS: Aluminium, schwarz eloxierte Oberfläche. Die Schiene misst 4-7/16" (11,3 cm) in der Länge und 9/16" (1,4 cm) in der Höhe. Passt auf folgende Modelle mit seitlich gebohrtem Empfänger: 26B, 26C, 42A, 42B, 42C, 42M (alle Varianten), 43, 44B, 44US (alle Varianten), 46A, 46B (alle Varianten), 46M (alle Varianten) und die meisten Wards-Westernfield-Gewehre (hergestellt von Mossberg) mit seitlich gebohrten Löchern, die 1-5/8" (4,1 cm) center-to-center messen.
Mehr...
Kundenbewertungen zu HAVLIN M22 Scope Mount
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 5
great product(29.10.2009)
this mount was a direct replacement product was exactly as described
Good Product!!!!(19.11.2009)
This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.
Good product(29.05.2011)
Does exactly what it's supposed to do at a good price.
Easy to install(02.02.2012)
This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!
Solid and Well made(06.06.2012)
Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw
Jum
Great Product(10.06.2012)
Bought this for a Stevens mdl 87 (branded Western Field). This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!
I would buy this product again and again(08.07.2012)
Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks
Havlin M22 scope mount on old Savage 6A(04.12.2014)
I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!
Wards Western Field 47C(04.10.2015)
Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.
Mounted on 46m mossberg 22 rifle(13.12.2017)
Works good . You can't go wrong. Fast shipping. Thanks JIM.
Fits Mossberg Model 42 vintage 1935(11.07.2018)
Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.
Artikel-Nr.: 100001258 HAVLIN M22 Scope Mount Herstellerproduktnummer: NONE Die Weaver-Schiene passt sich der Krümmung des Empfängers an und wird an den vorhandenen Montageschrauben befestigt, wodurch jedes Durchmesser-Zielfernrohr direkt über dem Lauf zentriert wird. Erlaubt die Montage von Vollformat-Zielfernrohren und Rotpunktvisieren. Bietet genügend Platz, um die originalen Kimme und Korn an ihrem Platz zu lassen. Einfache Installation: Entferne die Verschlussabdeckung, falls vorhanden, um den Verschluss über die Montage zu führen; füge Ringe und das gewünschte Zielfernrohr hinzu.
59.9EUR5059,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.
SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.
Mehr...
Aktualisiere dein Vintage-Rimfire mit den Optiken deiner Wahl
Die Weaver-Schiene passt sich der Krümmung des Empfängers an und wird an den vorhandenen Montageschrauben befestigt, wodurch jedes Durchmesser-Zielfernrohr direkt über dem Lauf zentriert wird. Erlaubt die Montage von Vollformat-Zielfernrohren und Rotpunktvisieren. Bietet genügend Platz, um die originalen Kimme und Korn an ihrem Platz zu lassen. Einfache Installation: Entferne die Verschlussabdeckung, falls vorhanden, um den Verschluss über die Montage zu führen; füge Ringe und das gewünschte Zielfernrohr hinzu.
SPECS: Aluminium, schwarz eloxierte Oberfläche. Die Schiene misst 4-7/16" (11,3 cm) in der Länge und 9/16" (1,4 cm) in der Höhe. Passt auf folgende Modelle mit seitlich gebohrtem Empfänger: 26B, 26C, 42A, 42B, 42C, 42M (alle Varianten), 43, 44B, 44US (alle Varianten), 46A, 46B (alle Varianten), 46M (alle Varianten) und die meisten Wards-Westernfield-Gewehre (hergestellt von Mossberg) mit seitlich gebohrten Löchern, die 1-5/8" (4,1 cm) center-to-center messen.
Mehr...
Kundenbewertungen zu HAVLIN M22 Scope Mount
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 5
great product(29.10.2009)
this mount was a direct replacement product was exactly as described
Good Product!!!!(19.11.2009)
This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.
Good product(29.05.2011)
Does exactly what it's supposed to do at a good price.
Easy to install(02.02.2012)
This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!
Solid and Well made(06.06.2012)
Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw
Jum
Great Product(10.06.2012)
Bought this for a Stevens mdl 87 (branded Western Field). This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!
I would buy this product again and again(08.07.2012)
Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks
Havlin M22 scope mount on old Savage 6A(04.12.2014)
I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!
Wards Western Field 47C(04.10.2015)
Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.
Mounted on 46m mossberg 22 rifle(13.12.2017)
Works good . You can't go wrong. Fast shipping. Thanks JIM.
Fits Mossberg Model 42 vintage 1935(11.07.2018)
Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.