Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

VANG COMP SYSTEMS
REMINGTON 870/11-87 12GA STAINLESS STEEL FOLLOWER

100002463

Strong, Dependable Replacement For Factory Followers

High-visibility stainless steel follower replaces the factory follower in Remington 870 and 11-87 shotguns. These are turned from a solid piece of stainless-steel bar-stock. This multitasking replacement for your factory-installed magazine follower travels smoother in your magazine tube due to its reduced bearing surface. Won’t break under spring pressure, won’t rust and holds up to years of shooting. Bright stainless steel makes it easy to see how many rounds are left in the magazine tube. Ribbed side and drilled out center hole reduce weight without jeopardizing overall strength. These followers are a slotted design. Available in 12 gauge.

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

Mehr...

Starker, zuverlässiger Ersatz für werkseitige Follower

Der hochsichtbare Edelstahl-Follower ersetzt den werkseitigen Follower in Remington 870 und 11-87 Flinten. Diese werden aus einem massiven Stück Edelstahl-Stangenmaterial gefertigt. Dieser vielseitige Ersatz für deinen werkseitig installierten Magazin-Follower gleitet aufgrund seiner reduzierten Tragfläche sanfter in deinem Magazinrohr. Bricht nicht unter Federdruck, rostet nicht und hält jahrelangem Schießen stand. Der helle Edelstahl macht es einfach zu sehen, wie viele Patronen noch im Magazinrohr sind. Die gerippte Seite und das durchbohrte Zentrum reduzieren das Gewicht, ohne die Gesamtstärke zu gefährden. Diese Follower haben ein geschlitztes Design. Erhältlich in 12 Gauge.

TECHNISCHE DATEN: Edelstahl. 7⁄8" (2,2 cm) Durchmesser, 5⁄8" (1,6 cm) dick.

Mehr...

Kundenbewertungen zu VANG COMP SYSTEMS Remington 870/11-87 12 Gauge Follower, Stainless

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,9

Vang Comp Follower (04.03.2010)

Got this for my M930spx, Got rid of the cheapo plastic safety and the plastic follower with the VC stainless one. Just takes the doubt out of your combat weapon. A few less things for Murphy to mess with.

S/S Follower for Mossberg 590A1! (27.11.2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27.08.2011)

Excellent product. The SS follower was easy to replace the factory follower. The quality difference between the original factory follower and this follower is significant. The original was plastic, bright yellow, and flimsy in the tactical 870 I purchased. At the time of purchase I didn't know the tactical 870 was built on the express line of 870's. This replacement is just one of the many additions that needs to be done in order to make the express a more reliable gun.

Very nice. Very high quality. (23.09.2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27.06.2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24.04.2013)

I installed this a few days ago and it is smoother to load shells. You will have to grind off the two demples in the mag tube before incerting the follower. This was no problem using a dremel type tool.

Great Replacement (05.05.2013)

The old original follower was black plastic, could not see it, this one is bright SS, you can tell instantly when the tube is empty.

Excellent Follower (23.05.2015)

Overall this follower is great and highly recommended. It functions so much smoother than the original plastic garbage that comes with the 870. It is important to note that if your 870 have the dimples on the magazine tube, they need to be removed before you can use this follower (by either grinding them off or pressing them out with the proper tool). It is also important to note that this follower will hang up if you're using a tube extension and there is any kind of gap between the guns tube and the extensions tube. If you use a 2 piece tube extension design (tube and nut separate pieces like the Remington branded extensions) be sure to screw your extension all the way down until it contacts the guns tube and then torque the nut. Tube extensions with the nut built onto them (Nordic, Carlsons, Choat, etc) may have problems with this follower (or any other aftermarket follower). If you're not comfortable working on guns, then have a qualified gunsmith fit this part and remove the tube dimples for you.

Not much to say, it just works. (15.11.2016)

Not much to say about this one. It just works. Vang comp is now offering followers that are slotted for dimpled 870s. I have the brownells stainless follower in one 870 and this one in another. I prefer the vang comp because of the hole that is easy to feel when wearing gloves but they are both quality and reliable.

Great product (23.04.2017)

Have this follower in my 870 for sometime with zero issues. Quality, fit and finish is what I expect from Hans Vang and he has not let me

Down. It's a great product, easy to see and feel if wearing gloves, very smooth in the feed tube. You can't go wrong upgrading from

Cheap plastic follower that the Remington 870 comes with to the Vang.

Lesen Sie 10 weitere Bewertungen bei brownells.com

36.9 36.9 1 EUR

Artikel-Nr.: 100002463
VANG COMP SYSTEMS Remington 870/11-87 12 Gauge Follower, Stainless
Herstellerproduktnummer: NONE Der hochsichtbare Edelstahl-Follower ersetzt den werkseitigen Follower in Remington 870 und 11-87 Flinten. Diese werden aus einem massiven Stück Edelstahl-Stangenmaterial gefertigt. Dieser vielseitige Ersatz für deinen werkseitig installierten Magazin-Follower gleitet aufgrund seiner reduzierten Tragfläche sanfter in deinem Magazinrohr. Bricht nicht unter Federdruck, rostet nicht und hält jahrelangem Schießen stand. Der helle Edelstahl macht es einfach zu sehen, wie viele Patronen noch im Magazinrohr sind. Die gerippte Seite und das durchbohrte Zentrum reduzieren das Gewicht, ohne die Gesamtstärke zu gefährden. Diese Follower haben ein geschlitztes Design. Erhältlich in 12 Gauge.

36.9 EUR 0 36,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Großlager.

Eigenschaften: Gauge: 12 Gauge Hersteller: Remington Modell: 11-87, 870

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Edelstahlfollower ersetzt den werksseitigen Follower in Remington 870 und 11-87 Schrotflinten.
Er gleitet reibungsloser im Magazinrohr und hält jahrelangem Schießen stand.
Das helle Edelstahl erleichtert das Ablesen der verbleibenden Patronen im Magazinrohr.

Eigenschaften

Hersteller/Modell: Remington Modell: 11-87,870 Schrotkaliber: 12 Gauge Versandgewicht: 0,005kg Versandhöhe: 8mm Versandbreite: 71mm Versandlänge: 114mm

Artikeldetails

Made in USA

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de

Ersetze deinen werkseitigen Follower mit dem VANG COMP SYSTEMS Edelstahl-Follower für Remington 870/11-87. 🔥 Langlebig und rostfrei!

Strong, Dependable Replacement For Factory Followers

SPECS: Stainless steel. 7⁄8" (2.2cm) diameter, 5⁄8" (1.6cm) thick.

Mehr...

Starker, zuverlässiger Ersatz für werkseitige Follower

TECHNISCHE DATEN: Edelstahl. 7⁄8" (2,2 cm) Durchmesser, 5⁄8" (1,6 cm) dick.

Mehr...

Kundenbewertungen zu VANG COMP SYSTEMS Remington 870/11-87 12 Gauge Follower, Stainless

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,9

Vang Comp Follower (04.03.2010)

S/S Follower for Mossberg 590A1! (27.11.2010)

This S/S follower by VANG COMP SYSTEMS also fit and funtion perfectly with my Mossberg 590A1.

Great Replacement Follower (27.08.2011)

Very nice. Very high quality. (23.09.2011)

Fits beautifully... no issues with mag tube extension. Looks great.

Nice follower (27.06.2012)

The only negative I can find is that I prefer the Brownells stainless and aluminum followers but this is also a quality part. Much better than the factory plastic piece.

A good improvement (24.04.2013)