STRIKE INDUSTRIES
RIFLE AK TO AR BUFFER TUBE ADAPTER

700598350463 100016868

Strike Industries stock adapter allows for the replacement of any standard fixed AK stock to be converted to accept an AR buffer tube assembly. This adapter is easy to install without any modifications to your AK. With no need to permanently alter the stock tang as it fits inside the adapter and tube. This product will take your AK into the twenty first century with the looks and the adjust-ability of a M4. Strike Industries also incorporated QD (quick disconnects) on both sides of the AK stock adapter.

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Mehr...

Der Stock-Adapter von Strike Industries ermöglicht es, jeden standardmäßigen festen AK-Schaft so umzurüsten, dass er eine AR-Buffer-Tube-Baugruppe aufnehmen kann. Dieser Adapter ist einfach zu installieren, ohne dass Modifikationen an deiner AK erforderlich sind. Es ist keine permanente Veränderung des Schaftansatzes notwendig, da er in den Adapter und das Rohr passt. Dieses Produkt bringt deine AK ins 21. Jahrhundert mit dem Aussehen und der Verstellbarkeit eines M4. Strike Industries hat außerdem QD (Quick Disconnects) auf beiden Seiten des AK-Schaftadapters integriert.

SPECS: Länge: 2,5", Gewicht: 4oz, Material: T6061 Aluminium.

Mehr...

Kundenbewertungen zu STRIKE INDUSTRIES AK to AR Buffer Tube Adapter Black Aluminum

Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3,8

does not fit (29.05.2015)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (03.06.2015)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (05.09.2015)

I received the product 3 days before it was schedule to arrive, so my 'hats off' to Brownells for their speed of processing delivery. The part fit into my Warsa 10/63 lower receiver without any problems. It is made of the same strong material used in a lot of today's AR's, and the location for the QD attachments is where I like them to be. With the stock fully collapsed, it is a half inch shorter than the standard AK stock, fully extended it is as long as an A2 stock for those that like the longer length of pull.

The only 2 issue's I did have was; (1) the lack of a proper fitting allen key tool to set the lock screw for the buffer tube and the two mounting screws, (2) I had to use a sanding wheel to grind down the edge of the mounting screw that went under the recoil spring/ locking latch for the dust cover to get it to fit flush with the surface and have everything mount properly back into place on the receiver. Other than those two minor issues, this is a great product for anyone who wants to mount an AR collapsible butt stock to their AK 47/74 rifle's. I would have given it 5 stars instead of 4, if it was not for having to do a little work when I was installing the part.

So far, so good (25.10.2015)

I researched this item and went back and forth between it and the rifle dynamics version. This one is half price and when "chatting" with the Brownell's rep, he said I could return it if didn't work out. Well, I figured that was worth a try. The unit fit well on my Saiga with some minor fitting of the mounting screw (filing). However, there are no directions and there are two pieces that fit inside the adapter that I truly don't know what their purpose is. That said, it fit well and looks good. I put a Magpul MOE stock on the AK. The length of the stock with the adapter is outstanding. Time will tell as to durability, but so far I'm very happy.

Exellent product, but... (16.02.2018)

Excellent adapter, very well made.

The best if you plan on using the iron sights as the tube comes lower then on any other similar adapters.

Only caveat is that requires quite a LOT of fitting to install on Norinco; the receiver of T56 is made of 1.5 mm steel compared to most East Block AKs where the material is 1 mm â so the inner diameter is smaller then on most models.

Also, the Chinese tang is about 6 mm longer then standard, so the holes do not fit (see the pic â after taking it, I ended up filing the rear tang hole so it aligns with the hole on the adapter)

I filed the sides and the "forehead" of the part of the adapter that goes inside the receiver, and filed the rear tang screw hole some â now it fits tight and very solid, even without the adjustment pieces.

<img width="500" src='/userdocs/reviewimages/c70e0c1a-d3be-4dee-9d83-9353443560d7.jpg' alt=''>

Lesen Sie 5 weitere Bewertungen bei brownells.com

59.9 59.9 1 EUR

Artikel-Nr.: 100016868
STRIKE INDUSTRIES AK to AR Buffer Tube Adapter Black Aluminum
Herstellerproduktnummer: SI-AK-SA 700598350463 Der Stock-Adapter von Strike Industries ermöglicht es, jeden standardmäßigen festen AK-Schaft so umzurüsten, dass er eine AR-Buffer-Tube-Baugruppe aufnehmen kann. Dieser Adapter ist einfach zu installieren, ohne dass Modifikationen an deiner AK erforderlich sind. Es ist keine permanente Veränderung des Schaftansatzes notwendig, da er in den Adapter und das Rohr passt. Dieses Produkt bringt deine AK ins 21. Jahrhundert mit dem Aussehen und der Verstellbarkeit eines M4. Strike Industries hat außerdem QD (Quick Disconnects) auf beiden Seiten des AK-Schaftadapters integriert.

59.9 EUR 0 59,90 € *

Nicht verfügbar.

Eigenschaften: Finish: Black Material: Aluminum

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Stock Adapter ermöglicht den Austausch eines festen AK-Schafts gegen eine AR-Pufferrohrmontage.
Installation ist einfach und erfordert keine Modifikationen am AK.
Integrierte QD (Quick Disconnects) auf beiden Seiten für zusätzliche Flexibilität.

Eigenschaften

Finish: Black Material: Aluminum Versandgewicht: 0,125kg Versandhöhe: 44mm Versandbreite: 44mm Versandlänge: 70mm UPC : 700598350463