Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS

184050130

Finest Workmanship & Quality; Made In USA From M-7 High Speed Steel

Made by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.

Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer.

SPECS: RIFLE REAMERS - 6, right-hand cutting, straight flutes. Solid pilot, integral throat. Stocked in Rougher and Finisher. 7/16" round shank with 3/8" square drive. ¼" round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Mehr...

Höchste Handwerkskunst & Qualität; Hergestellt in den USA aus M-7 Hochgeschwindigkeitsstahl

Hergestellt von Clymer, einer wirklich engagierten Gruppe von Waffenliebhabern, aus hochwertigem M-7 Hochgeschwindigkeitsstahl. Dies sind Präzisionswerkzeuge für den professionellen Büchsenmacher und bieten bei ordnungsgemäßer Pflege ein Leben lang Service. Vollständig garantiert. Roughers sind .010" kleiner im Durchmesser als die Endgröße, schneiden nicht in den Halsbereich und sollten verwendet werden, um den Verschleiß des Finish Reamers zu sparen, wenn viele Kammern geschnitten werden sollen. Wenn nur wenige Kammern geschnitten werden, ist ein Finish Reamer alles, was du benötigst. Hervorragende Qualität Reamer, hergestellt nach SAAMI-Spezifikationen.

Hinweis: Wenn du das gesuchte Kaliber unten nicht findest, zögere bitte nicht, unsere Abteilung für Sonderbestellungen zu kontaktieren, da viele zusätzliche Artikel von Clymer verfügbar sind.

TECHNISCHE DATEN: GEWEHR-REAMER - 6, rechtsdrehend, gerade Flöten. Solider Pilot, integrierter Hals. Verfügbar in Rougher und Finisher. 7/16" runder Schaft mit 3/8" quadratischem Antrieb. ¼" runder Schaft bei .22 RF. BESTELLUNG: Hinweis: 1) Artikelnummer. 2) Patronenkaliber und Name.

Mehr...

Kundenbewertungen zu CLYMER 22-250 Remington Finishing Reamer

Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 3,7

Works well (11.06.2011)

Using the methods outlined in Sweeney's AR-15 Gunsmithing volume, and lubed with Do-Drill, I was able to adjust the headspace on a new, non-chromed barrel. Less than a half-dozen turns brought the chamber to the point where the stripped bolt would just close on a Clymer GO gauge. With the gauge then lengthened by .003" using a piece of tape, I further adjusted the headspace with an additional 3/4 turn of the reamer. Now the bolt closes on the lengthened gauge but not on a NO-GO gauge. This should produce an accurate rifle.

Beautiful finishing reamer (30.04.2015)

Leaves a great finish, spec's out perfectly, and is a great value for the money.

Sharp as a razor (11.05.2015)

I used this to hand ream a short chambered barrel there was no chatter what-so-ever and the chamber was left with a mirror-like finish. I used plain ATF to lubricate this reamer and it worked great. It finished the chamber in 4 or 5 passes.

Good reamer (01.12.2013)

I heard bad things about Clymer reamers, but wasn't disappointed. Cut the chamber smooth and chatter free. I am happy.

Chatter (27.09.2010)

Clymer reamers have become notorious for chatter lately. I have had a couple that chattered, and several of my Gunsmith colleagues have had the same thing. I would not recommend the reamers by this company, as their quality has gone downhill in the past few years. My reamer chattered so bad so fast that the chamber was almost not salvageable.

Excessive chatter (12.09.2009)

Having used Clymer reramers in the past, I expected no problems. When I used this reamer it started to chatter immediately. Regardless of lathe speed or feed rate I was unable to eliminate the chatter. Thanks to the folks at Brownells, I was not stuck with this poorly made tool. I will continue to use Clymer reamers in the future, which I already have, but will think twice before buying another one.

CLYMER REAMER in .243 Winchester (14.10.2017)

If It works as intended, I shall be able to close my Remington 700 bolt with a cartridge in place with ease. My new Shilen 26" Chrome-Moly barrel with 1 in 10" twist is beautiful and almost ready to lock-and-load. So, I will inform you soon as to how the reamer performed. My main bullets are: Hornaday 75 grain V-Max and Swift Scirocco II 90 grain Bonded. I have no images yet, because I am not ready to disclose my findings. Cliffy

not worth spending the money on (04.03.2010)

Bought Clymer reamer because of reputation - MISTAKE. Even with a floating reamer holder, I couldn't make it stop chattering. Had to set barrel back & start over with another brand of reamer (worked great)

.223 reamer...finishing (08.06.2011)

This was used to extend the life of AR15 barrels that were getting a little long in the throat. The barrel extension is removed, 0.062 removed from the barrel shoulder (one thread) and the reamer is used to deepen the chamber 0.060. A "shot out" Krieger and a RR barrel were renewed and their usable lives were extended by a 2-3 thousand rounds.

Lesen Sie 9 weitere Bewertungen bei brownells.com

164.9 249.9 30 EUR

Artikel-Nr.: 184050130
CLYMER 22-250 Remington Finishing Reamer
Herstellerproduktnummer: F22250 Hergestellt von Clymer, einer wirklich engagierten Gruppe von Waffenliebhabern, aus hochwertigem M-7 Hochgeschwindigkeitsstahl. Dies sind Präzisionswerkzeuge für den professionellen Büchsenmacher und bieten bei ordnungsgemäßer Pflege ein Leben lang Service. Vollständig garantiert. Roughers sind .010" kleiner im Durchmesser als die Endgröße, schneiden nicht in den Halsbereich und sollten verwendet werden, um den Verschleiß des Finish Reamers zu sparen, wenn viele Kammern geschnitten werden sollen. Wenn nur wenige Kammern geschnitten werden, ist ein Finish Reamer alles, was du benötigst. Hervorragende Qualität Reamer, hergestellt nach SAAMI-Spezifikationen.

199.9 EUR 8 199,90 € *

Lieferzeit ca. 14-21 Tage.
8 Stk. im Großlager

Eigenschaften: Art: Rimless Rifle Patrone: 22-250 Remington

CLYMER RIMLESS RIFLE CHAMBERING REAMERS

Kundenbewertungen zu CLYMER 22-250 Remington Finishing Reamer

Top Takeaways

Eigenschaften

Artikeldetails

Kundenbewertungen zu CLYMER 22-250 Remington Finishing Reamer

Vernetzen

Sichere Bezahlmethoden

Berufsverbände

Willkommen!

CLYMER
RIMLESS RIFLE CHAMBERING REAMERS