Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

GRACE USA
ROLL PIN PUNCHES

731940876546 354000011

Non-Marring, Precision-Machined To Fit Common Pin Sizes

For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Roll Pin Punch Set includes 8 roll pin punches with ends that fit around roll pins without drifting off.

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Mehr...

Nicht verkratzend, präzise bearbeitet, um gängige Stiftgrößen zu passen

Zum Ausrichten von Visierungen, Eintreiben von Stiften oder Anpassen von Teilen, wenn Markieren oder Kratzen der Oberfläche den Unterschied zwischen einer gut gemachten Arbeit und einer Katastrophe ausmachen kann. Aus hochwertigem Messing-Sechskant gefertigt. Das Roll Pin Punch Set enthält 8 Roll Pin Punches mit Enden, die sich um Rollstifte legen, ohne abzudriften.

SPECS: Messing, 5⁄16" (7,9mm) Sechskant. Punch Set/Roll Pin Punch Set - 8 Punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" Durchmesser.

Mehr...

Kundenbewertungen zu GRACE USA Brass Roll Pin Punch Set, 8 pc

Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 2,2

Brass is a horrible pin punch material (14.03.2010)

This brass roll pin punch set is a nicely manufactured set that fails miserably at its intended function. The purpose of the brass is to eliminate marring of your upper or lower receiver as you are working. Brass fails for two reasons. First, you ABSOLUTELY can mar your receiver with brass. You can both gouge the aluminum and strip the anodizing off if you hit the punch against your receiver. Granted, it does less damage than a hardened steel punch, but don't let that lull you into a false sense of security. Second, these pin punches rapidly self-destruct as they are used. The steel roll pins quickly destroy the tip of your punches as you hammer them in. This is just a poor product, plain and simple. The best advise I can give you is to get a good set of steel roll pin punches from Brownells (lifetime guaranteed replacement) and be careful while using. Good luck!

Not worth the $'s (07.12.2011)

Bent the small punch with first time using....

Not Recommended (29.01.2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03.09.2013)

Brass punches are indeed "soft", that's the reason you buy brass punches over steel punches in the first place.

Other reviewers mention using these to install roll pins in AR receivers. Again, this is a failure on the reviewer's part.

Roll pins must be "started" with starter punches (SKU 080-685-000 for example) and then drive them in/flush with the proper roll pin punche (SKU 354-000-025). Those are the tools you need for an AR.

These brass punches on the other hand are for lighter use, on visible parts you don't want to mar. Hence they aren't recommended as "general purpose" punches.

Damaged too easily (31.03.2014)

I used these punches for my M&P to try and install one of the Apex Tactical kits. I had to go find other punches just to get the job done. The shafts are not long enough to make it through the body of the weapon. The small punch bent on first use. The roll pin ends have been flattened and no longer tipped. This set also left yellow/gold color brass on every pin I drove it. My black weapons now has golden highlights...

Long story short get a set of steel start punches so you don't bend your longer steel roll pin drift punches and be careful!

Excellent punches for their INTENDED use (20.02.2015)

Stop buying these punches to drive roll pins and stout steel pins that require STEEL punches of matching size and type. Brass punches are meant for adjusting driftable sights and delicate parts that you do not want to gouge or peen over with steel punches. Brass punches are not meant for installing roll pins in receivers nor staking fasteners, etc. If you use the wrong tool for the job and you're disappointed, the fault is yours, not the tool's. You wouldn't carve a turkey with a butter knife. I own 3 sets of Grace punches, 3 sets of their screwdrivers, hammers, and a set of picks. They are fantastic in build quality, craftsmanship, and have no doubts I could pass them down through generations. Their screwdrivers are outstanding and fit the screw heads perfectly if you use the proper size. They aren't cheap, but you get an investment with these. Take care of them and use them for the right jobs.

Lesen Sie 6 weitere Bewertungen bei brownells.com

64.9 64.9 1 EUR

Artikel-Nr.: 354000011
GRACE USA Brass Roll Pin Punch Set, 8 pc
Herstellerproduktnummer: BRP-8 731940876546 Zum Ausrichten von Visierungen, Eintreiben von Stiften oder Anpassen von Teilen, wenn Markieren oder Kratzen der Oberfläche den Unterschied zwischen einer gut gemachten Arbeit und einer Katastrophe ausmachen kann. Aus hochwertigem Messing-Sechskant gefertigt. Das Roll Pin Punch Set enthält 8 Roll Pin Punches mit Enden, die sich um Rollstifte legen, ohne abzudriften.

64.9 EUR 15 64,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Set, Roll Pin Material: Brass Menge: 8

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Das Set besteht aus 8 Roll Pin Punches in verschiedenen Durchmessern, perfekt für präzises Arbeiten.
Hergestellt aus hochwertigem, massivem Messinghexagon, das Langlebigkeit garantiert.
Ideal für das Verschieben von Visieren und das Eintreiben von Stiften, ohne die Oberfläche zu beschädigen.

Eigenschaften

Art: Roll Pin,Set Material: Brass Menge: 8 Versandgewicht: 0,318kg Versandhöhe: 18mm Versandbreite: 97mm Versandlänge: 163mm UPC : 731940876546

Artikeldetails

Made in USA

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de

Entdecke das GRACE USA Roll Pin Punch Set 🛠️ mit 8 hochwertigen Messing-Punches für präzises Arbeiten ohne Kratzer. Ideal für deine Projekte!

Non-Marring, Precision-Machined To Fit Common Pin Sizes

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set/Roll Pin Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" dia.

Mehr...

Nicht verkratzend, präzise bearbeitet, um gängige Stiftgrößen zu passen

SPECS: Messing, 5⁄16" (7,9mm) Sechskant. Punch Set/Roll Pin Punch Set - 8 Punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼”, 5⁄16" Durchmesser.

Mehr...

Kundenbewertungen zu GRACE USA Brass Roll Pin Punch Set, 8 pc

Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 2,2

Brass is a horrible pin punch material (14.03.2010)

Not worth the $'s (07.12.2011)

Bent the small punch with first time using....

Not Recommended (29.01.2012)

I've had this set for a while now, and not used until today. In working on one of my rifles I bent 2 of the brass punches. These punches cannot withstand any real working on rifles.

I disagree with other reviewers (03.09.2013)