SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.
Mehr...
SR25 Muster 308 Magazin, kalibriert auf .308. Der Magazin-Körper besteht aus Stahl und ist entweder mit 10 (orangen Follower) oder 20 (grünen Follower) Patronen erhältlich.
Mehr...
Kundenbewertungen zu D&H INDUSTRIES, INC. 6.5 Creedmoor/.308 Magazine 10-Rd Steel Black
Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 3,8
Works fine in my PA-10 gen2(28.12.2017)
Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.
Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.
works in Galil ACE and PSA G2 in 7.62x51(17.03.2018)
If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.
D&H has functioned fine and is half the cost of a Lancer mag.
awesome mags !(09.04.2018)
These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?
This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.
Does Not Fit DPMS RFLR G2B24(28.04.2018)
I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.
I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.
The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.
Returned for credit.
They fall out(07.10.2018)
I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!
Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.
DON'T PURCHASE THEM!!!!
Solid Construction(15.02.2017)
I love this solid steel construction!!!
Satisfied (07.08.2018)
Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.
Artikel-Nr.: 100022696 D&H INDUSTRIES, INC. 6.5 Creedmoor/.308 Magazine 10-Rd Steel Black Herstellerproduktnummer: DHT-12132-RT766897411304 SR25 Muster 308 Magazin, kalibriert auf .308. Der Magazin-Körper besteht aus Stahl und ist entweder mit 10 (orangen Follower) oder 20 (grünen Follower) Patronen erhältlich.
38.9EUR12338,90 €
*
Lieferzeit ca. 14-21 Tage. Mehr als 10 Stk. im Großlager
Eigenschaften:Aufnahmevermögen: 10-RoundFinish: BlackHersteller: AR .308Material: SteelPatrone: 308 WinchesterMenge: 1
Finish:
Black
Hersteller/Modell:
AR .308
Kapazität:
10-Round
Material:
Steel
Patrone:
308 Winchester
Versandgewicht: 0,156kgVersandhöhe: 38mmVersandbreite: 114mmVersandlänge: 273mm
UPC
: 766897411304
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 100023925 D&H INDUSTRIES, INC. SR25 Pattern 308 Steel Magazine 20rd Black Herstellerproduktnummer: DHT-11848-RT850012639183 SR25 Muster 308 Magazin, kalibriert auf .308. Der Magazin-Körper besteht aus Stahl und ist entweder mit 10 (orangen Follower) oder 20 (grünen Follower) Patronen erhältlich.
SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.
Mehr...
SR25 Muster 308 Magazin, kalibriert auf .308. Der Magazin-Körper besteht aus Stahl und ist entweder mit 10 (orangen Follower) oder 20 (grünen Follower) Patronen erhältlich.
Mehr...
Kundenbewertungen zu D&H INDUSTRIES, INC. 6.5 Creedmoor/.308 Magazine 10-Rd Steel Black
Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 3,8
Works fine in my PA-10 gen2(28.12.2017)
Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.
Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.
works in Galil ACE and PSA G2 in 7.62x51(17.03.2018)
If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.
D&H has functioned fine and is half the cost of a Lancer mag.
awesome mags !(09.04.2018)
These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?
This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.
Does Not Fit DPMS RFLR G2B24(28.04.2018)
I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.
I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.
The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.
Returned for credit.
They fall out(07.10.2018)
I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!
Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.
DON'T PURCHASE THEM!!!!
Solid Construction(15.02.2017)
I love this solid steel construction!!!
Satisfied (07.08.2018)
Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.
Hilfe und Kontakt
(0) 
Newsletter
Klassische Ansicht
Mobile Ansicht