605849700014 Ermöglicht dir, deine gesamte Hand zu benutzen, um die Waffe besser zu greifen, was die Rückstoßkontrolle verbessert und die Trefferquote konsistenter macht. Die Grip Extension erhöht nicht die Magazin-Kapazität oder das Gewicht. Die verlängerte „Regal“-Unterstützung für den kleinen Finger wird anstelle der Werksmagazinbasis befestigt. Das Schießen mit diesen kleinen „Häufchen“ wird dadurch viel angenehmer.
Lets you use your entire hand to grip the gun for better recoil control and more consistent shot placement. Grip Extension does not increase magazine capacity or weight. Extended “shelf” for the little finger attaches in place of the factory magazine base. Makes shooting these little “handfuls” a lot more comfortable.
Verbessert die Rückstoßkontrolle für bessere Genauigkeit
Ermöglicht dir, deine gesamte Hand zu benutzen, um die Waffe besser zu greifen, was die Rückstoßkontrolle verbessert und die Trefferquote konsistenter macht. Die Grip Extension erhöht nicht die Magazin-Kapazität oder das Gewicht. Die verlängerte „Regal“-Unterstützung für den kleinen Finger wird anstelle der Werksmagazinbasis befestigt. Das Schießen mit diesen kleinen „Häufchen“ wird dadurch viel angenehmer.
Top Takeaways
Ermöglicht dir, die Waffe mit der ganzen Hand zu greifen für bessere Rückstoßkontrolle.
Die Griffverlängerung erhöht weder die Magazinkapazität noch das Gewicht.
Die verlängerte „Ablage“ für den kleinen Finger macht das Schießen komfortabler.
Eigenschaften
Art:Grip Extenders
Modell:M&P Shield
Waffentyp:Smith & Wesson
Versandgewicht:0,02kg
Versandhöhe:33mm
Versandbreite:81mm
Versandlänge:112mm
UPC:605849700014
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (7)
4,9 / 5
Sehr empfehlenswert
VASTLY IMPROVES THE HITABILITY! 18.09.2018
I bought a SHIELD 2.0 in 9mm as a potential replacement for the 5-shot J-frame that I carry as my back-up gun. As a back-up gun, it will be holstered in my front pants pocket. I want to be able to use the 7-shot magazine, but there's no place for my pinky finger. As such, I cannot do good work with the pistol unless I use the 8-shot magazine.
This Pearce grip adapter replaces the factory floor plate in about 5 seconds. It doesn't make the grip any longer, but it creates a horizontal hook/pinky hanger that give my XL-size hand a full 3-finger grip. With this in place, I can do good work.
I like this part so much that I've ordered one for each carry mag and each practice mag. Try it; you'll like it!
Empfehlenswert
Had to file to fit but works great 17.04.2018
Got it, sliped it on my mag, mag would not lock in gun, removed, filed, sliped back on mag, mag locked in gun. Feels much more comfortable then without it. So in a nutshell it works but had to file to work, no big deal for me.
Sehr empfehlenswert
Preferred add-on for M&P Shield 04.04.2015
These enable a proper, full grip for most people on the standard magazine without excessive length to compromise the ability conceal the weapon or the sliding spacer issue that the factory +1 magazines have in their standard configuration. Installation is as simple as changing the floor plate during a normal magazine cleaning. As others have said, I don't know why these aren't the standard factory floor plate. Until they are, I'll add them to every one of my standard Shield mags.
Sehr empfehlenswert
This should have been OEM 21.03.2015
S&W should have put these on as standard equipment. Adds just enough extra length to allow a full five finger grip for me. I prefer the feel to that of the 8 round extended grip and the mag doesn't drag on my palm to impede a free drop during a mag change the way the S&W extended mag does. Installation is as easy as it gets.
Sehr empfehlenswert
Easy replacement, good fit and quality! 10.03.2015
Very easy to install. I did three in less than 10 min.
Sehr empfehlenswert
Worthwhile upgrade 11.02.2015
These should come with the factory magazines. It gives you the option to get a full grip on a small handgun without giving up concealability.
They are easy to install and fit well without sharp edges to pinch your hands when reloading.
Sehr empfehlenswert
BEST GRIP ADD ON IVE FOUD FOR THE M&P SH 21.07.2014
THE SHIELD IS A CONCEALMENT MADE S&W 9MM..WITH THE GUN BEING MADE AS SMALL AS POSSIBLE THE GUN SHOOTS VERY WELL AND THE RECOIL IS VERY LOW AND VERY EAST TO CONTROL. WHEN I ADDED THE EXTENSION ON IT FELT AS IF I HAD A GRIP PUT ON THAT ALLOWED MY HAND TO GRIP SO MUCH BETTER THAN BEFORE. I HAVE A LARGE FRAME HAND AND MY PINKY FINGER WAS BARELY ON THE GRIP. NOW IT IS PERFECTLY PLACED ON THE GRIP SO MY PINKY ASCTUALLY HOLDS ON AS MUCH AS ANY OTHER FINGER ALLOWING FOR MOREE ACCURATE SHOOTING FASTER SIGHTING BACK ON TARGET AND ALLOWING FOR FAIRLY ACCURATE ONE HANDED SHOOTING WITH HV AMMO. IN THE GUN. ALL AROUND BEST $10.00 IVE SPENT FOR THE GUN..ANYONE WHO DOESNT LIKE THE FEEL OF THE S&W SHIELD NEEDS TO SNAP THIS IN PLACE AND BE WOWED AT THE DIFFERENCE. IT INSTALLS IN 60 SECONDS OR LESS..I WOULD RECCOMEND THIS TO ANYONE WHO OWNS THIS GUN..
Verbessere deinen Griff mit der PEARCE GRIP S&W M&P Grip Extension! 🛡️ Für mehr Kontrolle und Komfort beim Schießen. Ideal für deine M&P Shield.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Die einteilige Konstruktion sorgt dafür, dass der Griff fest am Rahmen sitzt, ohne zu verrutschen.
Das ergonomische Design hilft, den Rückstoß zu absorbieren und ermöglicht präzise Schüsse.
Die genoppte Oberfläche verhindert ein Abrutschen der Hand und schont gleichzeitig die Kleidung im Holster.
Modularer Gas Block ermöglicht schnelle Installation und Entfernung von bis zu drei Picatinny-Schienen.
Präzisionsgefertigt aus robustem 6061 Billet-Aluminium, das die Waffe nicht beschwert.
Montage mit drei gehärteten Stahlschrauben für sichere Befestigung am Lauf.
Verfügbar für das M&P Shield 9mm mit 8-Runden Kapazität.
Hergestellt aus Edelstahl mit einer Polymer-Folger und Bodenplatte.
Hinweis: Passt nicht für das M&P Shield M2.0.
Der Apex Shield Action Enhancement Trigger Kit ersetzt den werkseitigen Scharnier-Trigger und reduziert den Vor- und Überweg um etwa 20%.
Das Kit bietet einen gleichmäßigen, konsistenten Triggerzug, der etwa 2 Pfund leichter ist und einen deutlich wahrnehmbaren Trigger-Reset hat.
Es ist einbaufertig und funktioniert mit allen Smith & Wesson M&P Shield-Pistolen in 9mm und .40 Kalibern, aber nicht im Shield 45.