N-202 PRO-SPRING KIT FOR S&W K,L,N FRAME REVOLVER

050806101883 080665202

"Guaranteed Superior"

Standard power kit with a Power Rib mainspring that duplicates the factory spring's rate. Gives positive ignition of magnum primers, vastly improved smoothness and consistency of pull. Includes 13, 14, and 15 lb. rebound springs for precise tuning.

Mehr...

"Garantiert Überlegen"

Standard-Power-Kit mit einer Power Rib Hauptfeder, die die Federkraft der Originalfeder dupliziert. Bietet eine zuverlässige Zündung von Magnum-Zündern und verbessert die Geschmeidigkeit sowie die Konsistenz des Abzugs erheblich. Enthält Rückfeder mit 13, 14 und 15 lb für präzises Tuning.

Mehr...

Kundenbewertungen zu BROWNELLS K/L/N Standard Kit

Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,4

poor quality (03.09.2011)

Had a hard time installing the mainspring when i tried to pull the hammer the mainspring hit the rebound slide and would not let the sear engage and the end of the spring bent, rebound springs are smaller dia than original and fit in the slide sloppy but does seen to work alright not impressed

Big improvement over stock springs (27.03.2012)

Just ordered my second Pro-Spring Standard Kit for a S&W revolver. This kit offers significant improvement over the stock springs without the worry of iffy ignition which can be the case with a lighter than standard spring kit. This kit can readily be put in by a basement gunsmith but if you've never done it before, watch Brownell's short instructional video on how to do so a couple times. If you still are not confident a smith can drop this in for you in a couple minutes. I installed my first kit w/o problem or modification. This is an inexpensive, quick, and easy way to smooth up your S&W revolver's DA and lighten it's SA trigger pull...

Great Set (03.09.2012)

Great product. All parts fit well. I added these in conjunction with trigger job. Very smooth. The best part of this kit is the full strength hammer spring. I have shoot all types of ammo and in 1000 plus rounds I have not had any mis fires.

202 Spring Kit (21.03.2014)

I picked up a NIB 629-6 for hunting, field carry, & defense. As usual out of the box, the SA trigger was adequate but a bit rough and the DA so heavy my trigger pull gauge couldn't display it. My upgrade priorities were sure ignition with a variety of primers due to spotty availability of components, safe clean breaking reasonably light SA pull, and a safe smooth reasonably light DA trigger pull. I used the Brownells 202 Spring Kit (standard rate Main Spring) and an Extra Long Firing Pin with outstanding results. Using the 15 lbs Trigger Rebound Spring I achieved a clean breaking 4lbs 2 oz SA, smooth 8lbs 4 oz DA, and the extra length firing pin yielded 100% ignition with every make & type of primer I tested/load including the Large Pistol Magnum that is so notorious for being hard to ignite. All parts fit perfectly and installation was fast & easy (disclaimer: I have several decades of experience working on S&W revolvers but a noob basement smith with some patience should have no problems). Couldn't be happier with the end result, were it allowed I would have 100% confidence in this handgun for duty carry. Once more, great products from Brownells. Thanks!

EXCELLENT (18.06.2016)

Brought a 1960's S&W Combat 41 Mag back to outstanding performance. I have WAY TOO MANY firearms. Oxymoron ? Tho the description says "by Brownells", these are Wolff Springs and I use and trust said Wolff's in every firearm I own because they are EXCELLENT and that is again... WAY TOO MANY !

Excellent upgrade for 629 (24.07.2016)

Bought this to reduce trigger pull weight on DA and smooth out DA/SA trigger for my 629. It does exactly that. Now I can shoot DA all day long as it reduced the weight significantly. Both DA/SA also feel more smooth than the factory. Also bought C/S extra length firing pin in case ignition problem, but it's not needed at all with 15 pound spring. Great stuff

19-6 (28.09.2017)

Ran into a NIB model 19-6. Not easy to do in my state. The stock trigger was excellent, 10.5 lb DA and 3.75 SA. I was very pleased but decided to try the standard kit to see if there was any improvement. Installation was a snap. I went with the 14 lb rebound spring. DA is now 9.25 lbs and SA at 3 even. It is even smoother in DA now.

Lesen Sie 7 weitere Bewertungen bei brownells.com

32.9 32.9 1 EUR

Artikel-Nr.: 080665202
BROWNELLS K/L/N Standard Kit
Herstellerproduktnummer: 95207 050806101883 Standard-Power-Kit mit einer Power Rib Hauptfeder, die die Federkraft der Originalfeder dupliziert. Bietet eine zuverlässige Zündung von Magnum-Zündern und verbessert die Geschmeidigkeit sowie die Konsistenz des Abzugs erheblich. Enthält Rückfeder mit 13, 14 und 15 lb für präzises Tuning.

32.9 EUR 108 32,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Standard-Power-Kit mit einer Power Rib Hauptfeder, die die Rate der Werksfeder dupliziert.
Verbessert die Zündung von Magnum-Zündhütchen und sorgt für eine sanftere Abzugskontrolle.
Enthält 13, 14 und 15 lb. Rückholfedern für präzises Tuning.