Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versand innerhalb Deutschlands: 2€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

BROWNELLS
RMR CUT SLIDE FOR GLOCK® 17 GEN 3

050806112926 078000497

Optic-Ready, Ergonomically Enhanced Slide With a Bundle of Custom Features

Our RMR Slide for Glock® 17 Gen3 pistols features distinctive, wraparound front cocking serrations that aid in manipulating the slide to check the chamber or clear a jam. (OK, we’ll admit it: the serrations just look cool, too.) It also comes with a pre-cut slot for easy, secure mounting of a Trijicon RMR or Holosun red dot sight. All RMR Slides also have standard Glock® factory front and rear sight dovetails for "iron" backup sights. To get proper co-witnessing with the RMR, you will need to also install suppressor-height iron sights. You can also get your Brownells RMR Slide for Glock® 17 Gen3 with a "window" cutout on top that enhances airflow to keep the barrel cool - ideal for hard-working action competition pistols. Plus, if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) the window lets you show it off a bit! Each RMR Slide for Glock® starts life as a billet of 17-4 stainless steel that is machined to Glock® factory specifications inside, so it’ll fit factory frames and accept factory or aftermarket barrels and Gen3 internal parts. Slides are heat-treated to Rc 41-44 on the Rockwell C scale for added surface hardness and wear resistance. You can get your RMR slide in one of 3 finishes: a wear-resistant basic Black Nitride, or a thin, extremely tough, physical vapor deposition (PVD) coating in Bronze or Flat Dark Earth (FDE). Fits Gen3 Glock® 17 pistols & clones Machined from corrosion-resistant 17-4 stainless steel billet Trijicon RMR mounting slot Also accepts Holosun HE508T, HS507C & HS407C red dot sights Plus factory front/rear sight cuts Available with distinctive top Window cutout or traditional Solid top A Brownells RMR Slide is the ideal upgrade for your factory Glock® 17 Gen3 pistol OR the perfect "top half" for a brand-new custom gun built on a Polymer80 80% frame. Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017. Includes patented optic cut technology pioneered by ZEV Technologies. Patent No. RE47335

Mehr...

Optik-bereiter, ergonomisch verbesserter Slide mit einer Vielzahl von benutzerdefinierten Funktionen

Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

Mehr...

Kundenbewertungen zu BROWNELLS RMR Slide +Window for Gen3 Glock™ 17 FDE PVD

Anzahl der Bewertungen: 41
Von brownells.com: 41
Durchschnittliche Bewertung: 4,1

Worth the money (28.09.2017)

Good value. OEM internals and barrel all fit just fine. Went on my Polymer80 build perfectly. Only issue is the non-standard thread pitch for the RMR mount.

Every single other slide I know of uses 6-32 pitch screws for the RMR, including the factory Trijicon screws. For whatever reason, this slide uses 4-40 and, as of 9/28/17, Brownells doesn't have any extra to provide, just in case you like having a few on hand just in case as I do. However, the slide is supposed to come with two of the proper sized screws to assist you in mounting your RMR.

All in all, I'd buy this again even knowing about the odd sized screws.

Did the Job (17.11.2017)

I converted my Glock 23 into a Glock 19. I considered the barrel conversion but the breach face is different on a 23 slide then it is on a 19. So I wanted to do a full 9mm upper. I chose Brownellâs Slide because (1) it was on sale (2) it was supposedly Glock specks (3) the RMR cut was supposedly low profile as to be able to use regular iron sights (Brownellâs later changed on the website that you needed Suppressor Sight, but whatever).

I built my upper. All the Glock internals fit just fine, including the channel Liner (used channel liner tool). It shot very well.

The RMR did sit very low. I was able to use regular iron sights to co-witness. I was very happy with the slide.

The only thing I didnât like was itâs too boxy. Wish they could have beveled the front and maybe have a more aggressive Chaffer cut (I might get it sent out for slide work). Other than that, it was a good product that was sold at a good price.

<img width="500" src='/userdocs/reviewimages/39ded037-e8aa-4012-b364-ddfe4f98e920.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/b39f001e-6a8f-4120-8ad2-e39729f751a5.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/325f4048-d5bf-4a45-8b38-ec113fbb0e3a.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/41936f0f-23d1-41dc-93d5-90b090a2dfda.jpg' alt=''>

Almost perfect. (14.12.2017)

I bought this slide in November 2017. Too good of a value to pass up with all the Black Friday discounts. Literally half price of any other âbuild-it-yourselfâ slides out there at the time, and with the features I wanted.

When it arrived, I was pleased to see that Brownellâs had addressed some of the âblockyâ criticisms by increasing the depth of the 45-degree chamfor on the top edge. The new top radius is more comparable to the Glock OEM profile (just angular), and matches other offerings out there by the big name Glock custom manufacturers.

The one down-side: Brownells RMR cut is deeper/lower than anyone else. The top profile matches most everyoneâs RMR angular cover plate out there, but everyoneâs RMR cover plate sits too low, and none are flush with the slideâs top profile. So if youâre not putting an RMR on it right away (which Iâm not), you get to choose between and odd-looking profile with a top plate sitting too low, or no plate at all and an open cut. Neither of these is very appealing, and has impacted my enjoyment of my new project.

Brownellâs needs to immediately offer their own matching top plate for (or included with) the slide ($30-40 value), include (even a plastic) spacer so itâll work with anyone elseâs top cover, or change the depth of their cut bringing it in line with everyone else (and replace my slide if you do!). If this happens, this becomes a five-star product rivaling anyone elseâs slide out there.

<img width="500" src='/userdocs/reviewimages/f811607d-7b2c-4510-9588-855d179cc62c.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/53893b73-8e0a-41e0-8f6a-c03f02cc0f53.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/ff0f017f-ac8e-428c-bb3b-6c16cc8968e0.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/1b298f2f-2120-4e89-83a9-e02f5c706f2c.jpg' alt=''>

Finishing Issues (27.01.2018)

Ordered this slide for a Polymer 80 Glock 19 build. Packaging for item was nothing special a bag with a little foam pad wrapped around. The slide itself has good weight and seems nicely machined, but upon further inspection I was left disappointed. The slide had a few issues with it starting with the uneven nitride spotting or chips. Slide also had some internal wear near muzzle slightly odd since itâs brand new. The slide had a chip on the rear corner of the slide. Finally the deal killer for me was that my particular slide had a sizeable burr on the rear serration. A burr on a piece of the slide I will frequently touch with my hands is completely unacceptable. Iâve read and heard Brownellâs makes nice gun parts, but this slide leaves much to be desired. I have a Brownellâs/ Victory First Glock 19 Barrel on backorder that I am considering canceling due to my experience with this item. I have contacted Brownellâs and I will see what they suggest. Overall nice slide, but my example has some issues that I canât live with considering the $200 price tag.

<img width="500" src='/userdocs/reviewimages/c0cd7ae1-2218-4844-a208-b5bdfee371ae.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/2849313e-f081-4da9-a5e4-c40477d4c033.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/8a710fee-4d19-43af-ad51-0e48766eb244.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/f16e844c-a69e-499d-b2eb-f82790def0e5.jpg' alt=''>

Great Value (14.02.2018)

Short and sweet, I was very impressed with this slide for the money. Channel liner was a bit tight but went in with a bit of pressure - I use an old style bic pen as an install tool, works great. Co-witness is better than my MOS 19. Ran 300 rounds thru it today, no issues.

<img width="500" src='/userdocs/reviewimages/c925c16b-19f0-4092-8c14-a88382a9fd84.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/bfaaf101-dbf4-4839-bfa1-12129445edcd.jpg' alt=''>

Could not of been better. (23.02.2018)

Fit and finish were perfect. Parts kit installed without issue. An amazing value at half the cost of any other RMR cut slide.

Gen3 RMR g19 slide (30.04.2018)

i got this back in feb 18 soon as i got it i put my rmr on it 2nd gen it fits but it is definitely a tight fit but it works with out any real problems in previous gen people said the slide wouldn't fit in any holsters mine fit in everything i had black hawk, trex, uncle mikes with no issues. now couple weeks ago i got a set of ameriglo suppressor sights front went in fine the rear fought me a lot idk if it was the slide the sight or me just being a noob but i got them on other then that thing worked great love it for the price

<img width="500" src='/userdocs/reviewimages/9837893e-8567-4665-9d3a-45884db0c6d5.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/064f91d4-fe35-4912-bcd0-ba2b89d186c5.jpg' alt=''>

I Love It (18.09.2018)

I bought this slide for my new RMR (RM05) as a cheaper and faster alternative to having it done by someone. When I received it I was very impressed by the fit and finish, and IT CAME WITH A CHANNEL LINER!! My RMR mounted up with no problems at all and the tolerances were tight and on point. I also really appreciate the raised studs for the RMR to sit on, so that slide manipulations donât mess with the zero. It fits all of my holsters, but it is kind of tight in the Blackhawk Serpa (not a big deal as I usually donât use it anymore.)

Overall Iâm very satisfied with it and I highly recommend it.

Quality at a good price. (11.10.2018)

I bought this, to go along with a stripped frame, barrel and parts kits I already had because I wanted to assemble a Glock from scratch for the first time. With only one minor mishap with a slide lock spring that may still be orbiting in space (I had a spare), it all went together quickly and easily.

I installed the rmr (rm01) and took it to the range & was very pleasantly surprised; my shooting has never been this accurate. I am now a firm believer in red dots on pistols. My eyes haven't been able to focus on the front sight without reading glasses for years and this rmr cut slide, along with the rmr of course, solved that problem.

Great slide for the money! (23.08.2017)

I used this for my Glock 17 build in 9mm. I was impressed with how well the slide looks and works. It is very blocky though there are lots of square angles. So it looks weird compared to a traditional slide. But overall I am happy with the fit and finish of the slide.

Slide isn't cut completely (10.11.2017)

Problems:

1. The slide wasn't cut all the way through for the extractor (see picture).

2. The whole for the firing pin channel line is too small. It looks like the firing pin channel might have been drilled to be used without the lining.

As such it's going back for replacement. Hopefully the replacement is going to be better.

<img width="500" src='/userdocs/reviewimages/958ec1eb-0723-45c3-a891-0d68eeb922ed.jpg' alt=''>

Great Slide, Needs to wear in (08.01.2018)

Great value for this slide, especially when it is on sale. I did not have any issues assembling it or attaching my RMR, however when I first assembled the entire Glock I had a series of failure to extract and feed problems. The bottom of the slide that rides on the trigger bar was just a little too thick so it was causing too much friction for the slide to successfully extract. This was solved very easily with a little lubrication and alot of racking the slide back and forth to wear it in until it finally worked. Have not had an issue since.

Correction to previous post (16.01.2018)

The sights I used were XS suppressor height big dot sights with the RMR, not TRUGLO, as stated.

Decent Slide with Decent Price (16.01.2018)

The slide Brownells shipped me first was for a Glock 19, although the bag said Glock 17. Called Brownells and they said a few of this items were misbagged, but that the issue is fixed. They immediately sent me the correct slide before I even returned the wrong one. That's solid customer service this return was simple (and free) with Edge. The slide is a good price, especially on sale, and cut exactly how I wanted to cut a slide, but at about the same price as a slide blank from Lone Wolf, it saved me man hours of machining and refinishing. The nitride finish seems well done, and the machining is pretty good for a lower priced slide. Lone Wolf slide completion kit, Lone Wolf recoil kit, Swenson threaded barrel, an RMR, and TRUGLO suppressor height sights all fit and operate well on a FS Glock frame. Had one minor fitting issue with the channel liner. I wrecked one putting it in due to a very tight firing pin channel. I used Edge free shipping to order a few extra since I was low on stock on the liners. Rolling a liner over some sandpaper got it to fit in snugly without breaking. If you haven't put a channel liner in a Glock slide, I recommend getting a few extras and buying a tool to install the liner. It makes it a little easier.

Works well, Good deal (11.02.2018)

This slide is good for the money. It is to spec, the RMR mounts very nicely on top, and unlike most other slides, the threads for rmr stick up, which should take pressure off of the screws and help maintain a better zero and be less hard on the optic you mount.

I don't think it is the most attractive slide, with the bulky vertical cuts. I think more thin, angled serrations are both more attractive, and feel better to grab (as seen on sigs and springfield XD's). This will not affect my review though, as I received what I was paid for.

Also, the edges on the serrations are a little.. serrated. Sharp at least, when compared to the factory glock slide. Overall, for the money, quality, and function, I WOULD give the slide 5 stars. However, the screws for this slide are proprietary, and my slide didn't come with any screws, which Brownells promptly corrected by shipping them to me when I called. Between the sharpish serrations, proprietary screws, and forgetting to include said screws, one star will be taken from gryffindor.

Solid performer, great value (16.03.2018)

Used this for a Poly80 v2 build. The rails are a few hundreds of an inch narrower than my G17 and G17L slides, so there is less lateral play when this slide is placed on the factory G17 and G17L frames.

When using this slide with the Poly 80, you may have to stone the sides of either the front or rear rails slightly to get this slide to even fit onto the rails. Make sure you get a nice stone for this job.

Function with factory G17, factory G17L, Swenson, and Silencerco threaded barrels is perfect.

This does require a tool to set the striker liner. Don't skimp and try to set the liner without the correct tool. You will mess up the liner!

Perfect! (03.04.2018)

I had absolutely no issues installing this part. It works perfectly with my LoneWolf AlphaWolf barrel, LoneWolf stainless extractor and internals. I read where people were having issues with the striker channel liner install so I buffed my striker channel with 1500 grit wet sandpaper, especially around the tapered end (that's supposed to go in first). With the proper tool, it installed easily and the slide functioned flawlessly out of the box. The XS sights were a great fit all the tolerances seem to be in spec.The machining and nitrite finish look perfect, very clean. This is such a great piece, especially for the price.

Nice slide (17.09.2017)

Put my stock 17 parts and barrel in it and fired about 50 rounds of reloads without a problem. The machining is very nice.

Tight striker Chanel (06.10.2017)

I left the 5 star reveiw above before I installed the Chanel liner. I believe it was under sized. I ruined my first liner trying to press it in and I had to sand down the 2nd one to make it fit. But I'm still happy with it overal.

Great Value (11.11.2017)

I recently bought this slide and the Brownell's slide completion kit. All parts, including the striker channel sleeve, fit the slide great and I've had perfect function on my Gen 3 Glock 17 frame. My buddy has this slide also and he has no complaints. Great machining and slide finish.

A great buy (08.12.2017)

Thanks Brownells for providing this RMR slide with such a good price and quality. It worked flawless for me. Even the channel liner went in without using a channel liner tool and a puncher. According to a Glock Tech who I talked to, the channel liner should be easily pushed in with fingers first and then by the firing pin spacer. He did exactly that for mine.

I shoot more than 100 rounds in the first time and became addicted to the RMR. Hitting the steel plate at 25 yards became a given! The entire slide and RMR worked flawlessly

Before this, I looked at ZEV's slides. Those are way too expensive in my mind. I do not know how people can justify that. I do not think anyone should spend that much for a slide. This one is perfect.

Channel Liner or no? (19.12.2017)

As another gent mentioned, I destroyed the channel liner trying to press it in. Fits fine about 2/3 of the way then stops solid. Almost looks like there is a liner in there already, but it looks silver or white. I guess Iâll order another channel liner and try what previous reviewer mentioned.

Great slide for an awesome price (14.01.2018)

The slide finish is perfect. My only complaint is that it was shipped in a bag that wasn't well padded - but the slide arrived unscathed. Others might not be so lucky - I would expect that this be boxed and shipped.

Anyway, standard Glock parts fit perfectly EXCEPT the CHANNEL LINER. First - THERE IS NO CHANNEL LINER INSTALLED! Despite what YouTube guys say - you need to install one. I had a lot of difficulty with the channel liner and destroyed 2 of them trying to put it in with the Channel Liner too. The hole in the slide is slightly too tight and you cannot pound a channel liner in without deforming it. You need to sand the outside of the channel liner a little to get it to hand fit in and then push it in with the channel liner tool. If you do not, there is no way the channel liner will fit.

Other than that, the slide is a great value and I can't understand why others are charging $300 - $700 for the same thing. Yeah, others might have more fancy cutting but it's a matter of a few machine minutes and not hundreds of hours. I am so happy with this one that I'm going to build another for a Glock 19 (Polymer 80). The style of this slide fits the Polymer80 design very well!

Worth a lot more than $175 (14.02.2018)

Based on the spotty reviews stemming from poor quality assurance, I wasn't quite sure what to expect, but I purchased this slide and hoped for the best. Let me say, I am glad that I made the leap because I am extremely impressed with this slide. In all fairness, I don't have experience with other aftermarket Glock slides, so I can only speak to Brownell's. Fit and function appear to be perfect. The nitride finish is beautiful, not a single defect. The RMR fits snug inside of the cut. I looked hard and cannot find a single machining mark on this part. I saw other reviewers complaining about defects, machining marks, etc. so perhaps there was bad batch, it happens, but that has not been my experience.

Mapleleaf Tactical out of Texas makes a Brownell's RMR Cut Slide Cover. They have a good selection of different materials and finishes (brass, aluminum, cerakote, etc.) and they sell for $30 to $42 shipped. I ordered one but it hasn't arrive yet. If I remember, I'll update images showing the cover installed.

Just a side note, I cannot stand when people knock off stars because they had to fit the friggin' channel liner. Not only is it irritating to us that are proficient with guns, but it is misleading to potential buyers who don't know any better...rarely is any gun part plug-n-play, especially with pistols. If you want a gun where you don't have to worry about fitment, then buy a production model gun or an AR15.

<img width="500" src='/userdocs/reviewimages/d593efa3-a088-44a2-b46a-268a0c453dc3.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/6ae94c00-578b-4242-848f-ec8bc8d83f06.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/5a033bba-aafa-4594-b8e9-73dfb9e1daeb.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/e4f637ce-b228-4372-b54d-d2368124685f.jpg' alt=''>

A nice product, but... (09.03.2018)

I gave this piece three stars, if I could I would give it 3.5 stars. Here are my reasons. First, while installing a factory Glock (white in color) channel liner it was destroyed. I purchased the channel liner here at Brownell's and assume it was a factory part. It seemed rather flimsy. I used a Brownell's channel liner tool on the second one, after cleaning the hole out thoroughly with alcohol on a swab. In hindsight I should have looked closer and cleaned the hole out where the channel liner fits the first time. The second channel liner was black (also purchased through Brownell's )and I am not sure if it was a factory Glock part. It had burrs on it so I cleaned them off, and then it slid right in. The channel liner was an inconvenience, I probably should have cleaned it out the first time I tried it.

The real issue is the RMR mount. The supplied screws are too short to properly retain the RMR properly. They need to be about 3mm longer to hold the RMR. Using the supplied screws only 1-2 threads are holding the RMR down, I wouldn't trust it. So now I have to source some longer screws. Apparently I am not the only one with this issue as I saw a question asked about the screw dimensions so they could also buy the correct screw. It is a 4x40 tpi T10 drive countersunk flathead .237" long.

Other than the RMR screws it is a very nice slide! The fit and finish are nice, it fit well and the price was good. The coating looks very nice and durable. I wish they would include the cover for the RMR slot or at least offer one. I would definitely purchase another slide, I have already recommended this specific slide to a friend of mine. His looked identical to mine and I assume it will function just as well!

Great Product, but...... (26.03.2018)

I bought a set of Trijicon Suppressor Height sights to use with the RMR but because the RMR sits so low in the cut out, half the window is blocked by the sights. Yes, low is good, but be aware there is a down side. I asked Brownells if they have adapter plates available and the answer is "No". Also, a recent article I read tells of issues with fit of Glock brand parts, as those parts vary. The writer tried three different extractors and only one fit. Just a caution. Mine all fit fine and functioned perfectly. And yes, the channel lined went in OK, but I did use the specific tool and followed correct instructions. After reading previous reviews, I decided to lube the channel first though--just in case.

Great purchase (19.09.2017)

Great product I bought this a rmr a completion kit and suppressor height night sights to try it all out the fit for the rmr was perfect the night sights went in great and everthing else fit perfect my only issue was the safety plunger hole was tight and was effecting the trigger pull but I used the dremel to take the finish off in the safety plunger hole and it worked perfectly

I won't not recommend (06.10.2017)

This product only fits a Trijicon RMR sight so if you want to fill the ugly blank on the back you have to buy a site that's four times the price of this Slide so you do the math also very hard to get the channel liner in have to force it almost breaking it

Impressed me (14.10.2017)

It fit perfect , great price extremely happy ð

I would recommend to a friend , I was skeptical at first based on price , turned out to be heavy duty well built and easy to install

<img width="500" src='/userdocs/reviewimages/48dc2d4a-7059-4499-bfa1-babbc9b488d2.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/786ccf0c-a784-4c69-817d-3e647e3ebb04.jpg' alt=''>

Best slide @ or under $200 (24.10.2017)

I used a coupon and got it for $210 shipped.

Shipping was fast and it was packed nicely.

Great slide works well on P80, takes some time to break in.

Great Price (18.11.2017)

Great price for a great slide. This is the first part that I have purchased for my build and after looking it over it looks extremely well made. No tooling marks, unfinished areas, or burrs. I will update if anything changes after I buy the rest of the pieces but so far so good.

<img width="500" src='/userdocs/reviewimages/38f8c1b7-79fb-4803-a933-908c1a7ff934.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/b5054781-cd49-4159-8e18-4f0f5ffae9fc.jpg' alt=''>

Fantastic Product!! Love Mine (18.12.2017)

I bought one of these for a G19 build I am doing, and I could not be happier. I love the look of the slide, it is super light which is nice. I can't wait for Brownells to get their cover plate to market for when I don't have the RMR on the pistol. Love this, I highly recommend all of the Brownells brand slides!

Awesome looking slide! (18.12.2017)

Awesome slide for the price! Highly recommend, used this to complete my P80 build. Only thing I wish was available from brownells is a cover plate for the rmr cutout, in case people are gonna use iron sights for awhile.

Great slide (04.01.2018)

Iâm using this for my polymer 80 build. Slide looked great. No imperfections that I could see anywhere on it. Amazing price especially compared to other aftermarket slides. Only small issue I have is it doesnât fit any of my holsters. Other than that I couldnât be happier with the slide.

Channel liner issue (05.01.2018)

Channel liner difficult to install even with a channel liner tool. I broke two when trying to install with little effort. Incredibly frustrating.

Done Right for a G19 (14.01.2018)

The description clearly states a channel liner needs to be installed. A channel liner installation tool makes the task exceptionally easy. After assembling all the other slide parts and installing them along with the Trijicon RMR sight, for which this slide is specifically milled (not other red dot or holo sights) a good lube with grease helps to shoot the slide in. The slide fits a G19 and I gather the 80% ones as well. I encountered no difficulties with any portion of assembly, installation or use of this slide. Customers need to read what is being purchased, it's use and have knowledge of what is needed and what tools and talents are required to make their experience 5 star instead of blaming the product for a lack of knowledge and/or skill.

Garbage Finish (20.01.2018)

Donât even know where to start! Iâve built around 15 ARâs but was getting bored with it and decided to tackle my first pistol build. Decided on the Polymer80 Glock 19, did quite a bit of research on parts. The Brownells slide seemed like the best combo of affordability and options so I ordered it. When it got here and I opened the plastic bag the first thing I see is surface rust in the extractor area ( cleaned up pretty easy, the second was the discoloration on the slide..not so easy! Tried the old AR trick of rubbing oil into the finish, that did not change a thing! Canât believe the place that manufactured this part would even let it leave their facility. Iâve bought a lot of Brownells branded AR parts ( Barrels, Bolt carriers etc.) and they all looked great. This, not so much! The only way I can see fixing the finish would be to get it Cerakoted which will add to price and completion time!

Perfect! (17.02.2018)

Nicely machined; All Glock parts fit well; Channel liner was very easy to install. A great value at a reasonable price!

Great 9mm slide (01.04.2018)

Great Slide, I took the parts out of my stock 19 for a starter project. I am now a fan of 9mm. It would be be nice if there was a .40 s&w option. I will not buy a factory glock again. If there was a .40 s&w, there would be more options with different calibers hint, hint,......

Great Stuff (01.05.2018)

Great product great price, Brownells service is impeccable. I had an issue with the original purchase, once I arranged a return and sent it to the post office. I called and was surprised at the speed and ease my problem was repaired. I had a new part faster than expected. Brownells is great. I recommend this slide as well. Mine came with the channel liner.

Needed some hand fitting. (08.09.2018)

Good price but itâs a rough slide. My channel liner went in hard and the rmr cut and rear site dovetail needed some fitting. Iâm blaming the slide instead of the parts because they fit well in other slides but were too tight to fit onto the slide without some serious filing. It really took the joy out of this for me. For the amount of time Iâd rather pay for a higher quality slide. Not a bad slide but it does feel chunky and blocky. It does not feel as finished as other slides.

Lesen Sie 41 weitere Bewertungen bei brownells.com

459.9 459.9 5 EUR

Artikel-Nr.: 078000497
BROWNELLS RMR Slide +Window for Gen3 Glock™ 17 FDE PVD 050806112926 Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

Benachrichtigt werden, sobald verfügbar? Hier klicken

Nicht verfügbar.

Eigenschaften: Art: Front & Rear Serrations Finish: Flat Dark Earth Hersteller: Glock Modell: 17 Patrone: 9 mm Luger Visierungen: RMR

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Kaufbeschränkungen

Abgabe nur an Inhaber einer Erwerbserlaubnis.

Top Takeaways

Der BROWNELLS RMR Slide für Glock® 17 Gen3 hat markante Front-Cocking-Serrations für einfaches Handling.
Er verfügt über einen vorgeschnittenen Slot für die Montage von Trijicon RMR oder Holosun Red Dot Visiers.
Das Design umfasst ein Fenster-Cutout, das den Luftstrom verbessert und ein Upgrade für deine Glock® 17 Gen3 darstellt.

Eigenschaften

Art: Front & Rear Serrations Finish: Flat Dark Earth Hersteller/Modell: Glock Modell: 17 Patrone: 9 mm Luger Visierungen: RMR Versandgewicht: 0,29kg Versandhöhe: 25mm Versandbreite: 25mm Versandlänge: 229mm UPC : 050806112926

Artikeldetails

Made in USA
No Export, dieses Produkt ist nur in Deutschland erhältlich.
US-Exportklassifizierung: 0A501.x

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de

Artikel-Nr.: 078200001
BROWNELLS RMR Slide for Gen3 Glock® 17 Stainless Nitride 050806112650 Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

459.9 EUR 109 459,90 € *

Lieferzeit ca. 14-21 Tage.
Mehr als 10 Stk. im Großlager

Eigenschaften: Art: Front & Rear Serrations Finish: Stainless w/Nitride Finish Hersteller: Glock Modell: 17 Patrone: 9 mm Luger Visierungen: RMR

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Artikel-Nr.: 078200003
BROWNELLS RMR Slide +Window Gen3 Glock® 17 Stainless Nitride 050806112674 Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

Benachrichtigt werden, sobald verfügbar? Hier klicken

Nicht verfügbar.

Eigenschaften: Art: Window Finish: Stainless w/Nitride Finish Hersteller: Glock Modell: 17 Patrone: 9 mm Luger Visierungen: RMR

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Artikel-Nr.: 078000495
BROWNELLS RMR Slide +Window for Gen3 Glock™ 17 Bronze PVD 050806112902 Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

Benachrichtigt werden, sobald verfügbar? Hier klicken

Nicht verfügbar.

Eigenschaften: Art: Front & Rear Serrations Finish: Bronze Hersteller: Glock Modell: 17 Patrone: 9 mm Luger Visierungen: RMR

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Artikel-Nr.: 430100411
BROWNELLS RMR SLIDE +WINDOW FOR GEN3 GLOCK® 17 LIMITED COLOR BROWN Unser RMR Slide für Glock® 17 Gen3 Pistolen verfügt über markante, umlaufende Front-Riffelungen, die das Manipulieren des Schlittens erleichtern, um die Kammer zu überprüfen oder einen Stau zu beheben. (Okay, wir geben es zu: Die Riffelungen sehen einfach cool aus.) Außerdem kommt er mit einem vorgefertigten Schlitz für die einfache und sichere Montage eines Trijicon RMR oder Holosun Rotpunktvisiers. Alle RMR Slides haben auch die standardmäßigen Glock®-Werkseitigen Dovetails für vordere und hintere "Eisen"-Backup-Visiere. Um ein korrektes Co-Witnessing mit dem RMR zu erreichen, musst du auch Visierungen mit erhöhtem Profil installieren. Du kannst deinen Brownells RMR Slide für Glock® 17 Gen3 auch mit einem "Fenster"-Ausschnitt oben bekommen, das den Luftstrom verbessert, um den Lauf kühl zu halten - ideal für leistungsstarke Wettbewerbspistolen. Außerdem, wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen Außenmuster (Riffelung, Spiralen, "Flammen" usw.) hast, kannst du ihn damit ein wenig zur Schau stellen! Jeder RMR Slide für Glock® beginnt sein Leben als Block aus 17-4 Edelstahl, der nach den Werkspezifikationen von Glock® bearbeitet wird, sodass er auf Werkrahmen passt und Werk- oder Aftermarket-Läufe sowie Gen3 Innenteile akzeptiert. Die Slides werden auf Rc 41-44 auf der Rockwell C-Skala wärmebehandelt, um die Oberflächenhärte und Abriebfestigkeit zu erhöhen. Du kannst deinen RMR Slide in einer von 3 Oberflächenbehandlungen erhalten: einer abriebfesten Grundierung in Schwarz-Nitrid oder einer dünnen, extrem robusten, physikalischen Dampfablagerung (PVD) Beschichtung in Bronze oder Flat Dark Earth (FDE). Passt auf Gen3 Glock® 17 Pistolen & Klone Bearbeitet aus korrosionsbeständigem 17-4 Edelstahlblock Trijicon RMR Montageschlitz Akzeptiert auch Holosun HE508T, HS507C & HS407C Rotpunktvisiere Zusätzlich mit Werksvorder-/hintere Visier-Ausschnitten Verfügbar mit markantem oberen Fenster-Ausschnitt oder traditionellem soliden Oberteil Ein Brownells RMR Slide ist das ideale Upgrade für deine Werk-Glock® 17 Gen3 Pistole ODER der perfekte "obere Teil" für eine brandneue maßgefertigte Waffe, die auf einem Polymer80 80% Rahmen gebaut wurde. Brownells Gun Tech™ Hinweis: Kanal-Liner erforderlich für diese Slides. Kanal-Liner ist ein Presspass und benötigt ein Werkzeug zur Installation. Wir empfehlen #777-100-017. Enthält patentierte Optik-Ausschnitt-Technologie, die von ZEV Technologies entwickelt wurde. Patent Nr. RE47335

Benachrichtigt werden, sobald verfügbar? Hier klicken

Nicht verfügbar.

Eigenschaften: Art: Window Finish: Bronze Hersteller: Glock Modell: 17, Gen 3 Patrone: 9 mm Luger Visierungen: RMR

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Upgrade deine Glock® 17 Gen3 mit dem BROWNELLS RMR Cut Slide! 🔥 Ideal für Trijicon RMR oder Holosun Visierungen. Perfekte Passform und cooles Design!

Optic-Ready, Ergonomically Enhanced Slide With a Bundle of Custom Features

Mehr...

Optik-bereiter, ergonomisch verbesserter Slide mit einer Vielzahl von benutzerdefinierten Funktionen

Mehr...

Kundenbewertungen zu BROWNELLS RMR Slide +Window for Gen3 Glock™ 17 FDE PVD

Anzahl der Bewertungen: 41
Von brownells.com: 41
Durchschnittliche Bewertung: 4,1

Worth the money (28.09.2017)

Did the Job (17.11.2017)

Almost perfect. (14.12.2017)

Finishing Issues (27.01.2018)

Great Value (14.02.2018)

Could not of been better. (23.02.2018)

Fit and finish were perfect. Parts kit installed without issue. An amazing value at half the cost of any other RMR cut slide.

Gen3 RMR g19 slide (30.04.2018)

I Love It (18.09.2018)

Quality at a good price. (11.10.2018)

Great slide for the money! (23.08.2017)

Slide isn't cut completely (10.11.2017)

Great Slide, Needs to wear in (08.01.2018)

Correction to previous post (16.01.2018)

The sights I used were XS suppressor height big dot sights with the RMR, not TRUGLO, as stated.

Decent Slide with Decent Price (16.01.2018)

Works well, Good deal (11.02.2018)

Solid performer, great value (16.03.2018)

Perfect! (03.04.2018)

Nice slide (17.09.2017)

Put my stock 17 parts and barrel in it and fired about 50 rounds of reloads without a problem. The machining is very nice.

Tight striker Chanel (06.10.2017)

Great Value (11.11.2017)

A great buy (08.12.2017)

Channel Liner or no? (19.12.2017)

Great slide for an awesome price (14.01.2018)

Worth a lot more than $175 (14.02.2018)

A nice product, but... (09.03.2018)

Great Product, but...... (26.03.2018)

Great purchase (19.09.2017)

I won't not recommend (06.10.2017)

Impressed me (14.10.2017)

Best slide @ or under $200 (24.10.2017)

I used a coupon and got it for $210 shipped.

Shipping was fast and it was packed nicely.

Great slide works well on P80, takes some time to break in.

Great Price (18.11.2017)