810162011680 Dieser speziell entwickelte Sear bietet dem Schützen einen kürzeren, schnelleren und saubereren Abzug. Der Sear ist aus gehärtetem A2-Werkzeugstahl mit Draht-EDM geschnitten. Passt für Ruger® MKII™, MKIII™ und 22/45™.
Auf Lager
Lieferzeit ca. 1-4 Tage. 2 Stk. im lokalen Lager 1 Stk. im Großlager
Lieferzeit ca. 1-4 Tage. 2 Stk. im lokalen Lager 1 Stk. im Großlager
Replaces Factory Sear For A Light, Clean-Breaking Trigger Pull
This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel. Fits Ruger® MKII™, MKIII™ and 22/45™.
Ersatz für den Werks-Sear für einen leichten, sauber brechenden Abzug
Dieser speziell entwickelte Sear bietet dem Schützen einen kürzeren, schnelleren und saubereren Abzug. Der Sear ist aus gehärtetem A2-Werkzeugstahl mit Draht-EDM geschnitten. Passt für Ruger® MKII™, MKIII™ und 22/45™.
Eigenschaften
Modell:Mark I,Mark II
Waffentyp:Ruger
Versandgewicht:0,009kg
Versandhöhe:10mm
Versandbreite:71mm
Versandlänge:86mm
UPC:810162011680
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.c
Kundenbewertungen
Kundenbewertungen (12)
4,1 / 5
Sehr empfehlenswert
Should be the first upgrade you do! 16.02.2017
Loved my new mkiii 22/45, everything but the trigger that is. After reading some reviews I ordered the volquartsen target sear. Install wasn't too bad after a few YouTube videos. The results are amazing! The trigger breaks so much cleaner and twice as easy as before just like it should.
Sehr empfehlenswert
What a game changer on my Mark II 02.01.2017
I installed this sear on a 24 year old SS slab sided Ruger Mark II along with a Vq trigger installed 24 years ago it's a game changer , the trigger breaks clean with no creep . I installed a pre set , set screw in the trigger guard when I added the trigger 24 years ago . This pistol has a trigger pull weight of 1 1/4 to 1 1/2 lbs . The triggers are the old style SS kind . Should have done the complete pistol years ago .
If your into shooting USPSA steel plates add the sear, trigger and you'll be set .
DoubleTap
Sehr empfehlenswert
Great Addition to those needing a Sear 03.09.2016
I replaced the factory Sear in my MkIII TARGET along with other modifications. The Factory trigger had a lot of take up and over travel as well as creep and a heavy, gritty break. So when I installed a new flat Faced Trigger, I decided to do the sear as well. No Fitting is required in a Mk II or Mk III, and it will not fit a Mk I. BTW, This sear would have a higher rating if the three reviews that talk about attempting to install in a MKI were dropped. I cannot imagine that installing this sear, by itself, would not make a major difference. I Installed with other modifications, the results are spectacular. I know that now, My MkIII trigger has no perceptible creep and breaks like a glass rod. So this was a major improvement over the stock sear. Very Pleased.
Bedingt empfehlenswert
Good, but not great 12.08.2014
My Ruger Mark III 22/45 is well-tuned, well-cared for, and has many thousands of rounds through it. The factory sear and hammer provided a crisp, repetitive three-pound release. While I have been quite satisfied with it, I installed the Volquartsen sear to see if it measured up to the claims I've read in reviews.
The VQ sear dropped the release to a fairly repetitive 1.6 pounds, but it feels a little mushy. I'll pass final judgement after a thousand rounds or so. But, at this point I'm not going to bother installing a VQ sear in my Mark III Target, which also has a crisp three-pound release. I'm perfectly happy with it.
Sehr empfehlenswert
Very Nice!!!! 09.05.2014
I installed this sear and also the company's SS target trigger. My original trigger pull was a heavy and grainy 4&1/4Lbs. This Sear and trigger combo brought it down to a very nice crisp and clean 1&3/4Lbs.I highly recommend it! FYI YouTube has videos that keep you outta trouble when disassembling and installing these parts.
Sehr empfehlenswert
Work on Ruger Standard Pistol 30.04.2014
Installed this sear and the Volquartsen stainless trigger easily on my Ruger Standard Pistol(pre Mark I)without any modifications. What a difference it made. Cut the trigger pull in half and no more creep. Very smooth and crisp trigger now. Best investment for this pistol.
Sehr empfehlenswert
Oh man.... 25.10.2013
This sear totally cuts the trigger pull in half! I love it. Makes the gun even more fun to shoot. I also added a Tandemkross hammer bushing and between the two, I have the most consistent trigger pull ever. I highly recommend the Volquartsen sear for any MKIII or 22/45 owner.
Sehr empfehlenswert
Sweet! 02.05.2013
I installed this sear in a MKIII target model. The difference in trigger pull is amazing. The release is very crisp. Installation for this and the Volquortsen trigger took about 45 minutes including a fair amount of associated cleaning, but I am familiar with the workings of these pistols. This sear is the single biggest improvement you can make to a MKII or MKIII Ruger.
Nicht empfehlenswert
Volquartsen sear for Mark II 23.05.2011
This sear is slightly taller than the original and would not allow the gun to be cocked.
Sehr empfehlenswert
It will work on MK I Rugers 25.03.2010
On most MKI's the [...] will work but on others fitting is required with the safety which is why we do not sell this part as a drop in item for the MKI.
Empfehlenswert
super item - not for Mark I 10.03.2010
Installs as directions indicate. Works great. Much better trigger pull. Have a Mark III DOES NOT WORK IN MK I
Nicht empfehlenswert
Did not fit in my MK I 17.11.2009
Not sure why Brownells says that this works with the Mk I. It doesn't. Even Volquartsen's website says Mark II or III only....
Brownells Deutschland GmbH
Lahnstr. 1
24539 Neumünster
Deutschland
info@brownells-deutschland.de
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Verbessere deinen Ruger® Mark II™/Mark III™ mit dem VOLQUARTSEN Target Sear für einen schnelleren und saubereren Abzug! ✨
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Präzisionsgefertigt aus Billet für eine perfekte Passform und reduziertes Abzugsgewicht.
Die Stellschraube ist einstellbar für Überweg und Vorweg, auch bei montierter Waffe.
Verfügbar in schwarz eloxiertem Aluminium oder poliertem Edelstahl (SS) mit einer 9mm breiten Abzugsschuhfläche.
CNC-gefräst aus gehärtetem Stahl für gleichmäßigen Abzugswiderstand.
Perfekte konzentrische Bohrung des Drehgelenklochs für optimale Hammer-zu-Abzug-Verbindung.
Schwarz oxidierte Oberfläche sorgt für Haltbarkeit und Korrosionsbeständigkeit.
Die TANDEMKROSS MKIII™ & 22/45™ Magazine Disconnect Bushing ersetzt die werkseitige Ruger-Buchse.
Sie ermöglicht das sichere Entfernen des Magazintrenners, sodass das Magazin frei aus der Waffe fallen kann.
Nach der Installation hat die Buchse keinen Einfluss auf die Funktion oder das Gefühl des Abzugs.
Der VOLQUARTSEN Target Hammer verringert den Abzugswiderstand bei MK II™ Pistolen um 35%.
Er ist elektropoliert für eine ultra-glatte Sear-Oberfläche und einen präzisen Abzug.
Der Hammer passt nur für Ruger MK II und .22/.45 Pistolen und wird mit Strut und Pin geliefert.
Die PACHMAYR Grip Glove verbessert den Schießkomfort und die Genauigkeit deiner Glock® Compact durch eine rutschfeste, konturierte Gummihülle.
Fingerkerben und eine leichte Handballenerhöhung reduzieren den gefühlten Rückstoß und das Hochschlagen des Laufs für präzise Folgeschüsse.
Die strukturierte Oberfläche mit vertikalen und horizontalen Rillen sorgt für einen bequemen Halt, besonders während längerer Bereitschaftszeiten.